Will SumoSprings For 2019 Ford F-150 Raptor Rest on Frame Squarely When Loaded

Question

Question:

I saw a detailed video that shows the Sumo Springs fit OFFSET on the frame for the Raptor. This means that only half of the spring bears on frame. Is this true or are the springs guaranteed to resting entirely on the frame with no hang over, Thanks,

asked by: David L

0

Expert Reply:

The SumoSpring part # SS552GR that fits your 2019 Ford F-150 Raptor attaches to a bracket that attaches to your truck frame so it does not miss contact with the frame at all. The load would be evenly distributed on it.

expert reply by: Jameson C

0

Answer 1

You are dead on. The only difference between the Timbren Active Off-Road Bumpstops - Rear Suspension - 2,000 lbs #TABSFR150RB and the 2400lb #TFR150RB for your 2018 Ford F-150 Raptor is the load rating. The correct system will come down to what you…

view full answer...

Answer 2

The Timbren Suspension Enhancement System - Rear Axle #TFR150RB will provide great load support but it may feel a little jolt when you hit a bump or pothole. There is not a airbag system for your truck presently, so I recommend instead using the…

view full answer...

Answer 3

We certainly do have bump stop helper springs that replace the factory bump stops in your 2018 Ford Raptor. For the best ride quality, I'd recommend going with the SumoSprings Solo, part #SS52GR which will provide up to 1500 lbs of additional…

view full answer...

Answer 4

I really like the SumoSprings Solo Custom Helper Springs - Rear Axle part #SS52GR for this situation. They engage much more smoothly than the Timbrens part #TFR150RB do. The overall user experience is going to be better for you since you won't…

view full answer...

Answer 5

I had our warehouse measure the Timbren Suspension Enhancement System #TFR150RB for your 2019 Ford Raptor, and it has an overall height of 5-9/16" as shown in the included diagram. The mounting bracket measures 1-1/8" tall, the spacer is…

view full answer...

Answer 6

For your 2019 Ford F-150 Raptor towing a 6000lb boat I recommend using the RoadActive Suspension Leaf Spring Enhancement Kit #RAS3611 you purchased as it will be the best at preventing sag like you are experiencing, but will also eliminate axle wrap…

view full answer...

Answer 7

At this time (February 2022) we have Timbren suspension kits that fit your 2022 Ford F-150 Raptor like the part #TABSFR150RB but we do not have any air bag kits. I would assume something will come out eventually but we don't have a lead time.

view full answer...

Answer 8

I have attached a link to the part of our website that lists the current deals going on. You can also go to the Etrailer website and click on the "deals" tab on the right side. We do not currently have a deals category that is vehicle…

view full answer...

Answer 9

Yes, the Roadactive Suspension Kit part #RAS3611 will fit your 2020 Ford F-150 Raptor with the SumoSprings #SS52GR.

view full answer...

Answer 10

The correct set of SumoSprings Solo Custom Helper Springs for your 2019 Ford F-150 Raptor is part #SS52GR (SumoSprings 142-47). I confirmed this with SumoSprings for you.

view full answer...

Answer 11

The SumoSprings Solo Custom Helper Springs - Rear Axle part #SS52GR will help with rear sag on the Ford Raptor and is the best option for ride quality. Some of the other springs available for the Raptor can create an uncomfortable and stiff ride when…

view full answer...

Answer 12

The Firestone Ride-Rite Air Helper Springs part #F2565 for a 2014 Ford F-150 Raptor have a compressed height of 6.5" and an extended height of 13.5". Therefore, the travel of the air springs is 7". If you're looking for an option…

view full answer...