Will Rhino-Rack Conduit Clamp Set Fit Rola Haul-Your-Might T3 Truck Bed Ladder Rack Top Channel

Question

Question:

Will Rhino-Rack Conduit Clamp Set # RRBC2 Work on Rola Haul-Your-Might T3 Truck Bed Ladder Rack - Aluminum - 800 lbs as it looks like the M8 Channel Nuts are compatible with the Rola Ladder Rack?

asked by: Marcel S

0

Expert Reply:

Yes the channel nuts of the Rhino-Rack Conduit Clamp Set # RRBC2 will fit into the top channels of the Rola Haul Your Might Ladder Racks.

expert reply by: Jameson C

0

Answer 1

The Rhino-Rack Conduit Endcaps #RR92SV is designed for Schedule 40 PVC pipes which are 3.9 inch diameter.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

There is actually a carrier specifically for your application. Well, not vaulting poles, but 6 inch PVC pipe. Take a look at Conduit Carrier Kit # RP7054900. It fits 6 inch diameter PVC schedule 40 or 80 and this set up can be locked using a padlock…

view full answer...

Answer 6

Rhino Rack offers the RT-Style Roof Rack Track that would mount directly to the roof of your 2008 Ford Ranger with pop rivets. You will need a rivet gun to install this track so if you do not have one already, you could purchase one from a local…

view full answer...

Answer 7

The Rhino-Rack Heavy-Duty 50-Inch Roof Rack Crossbar #RB1250S has cross-section dimensions of 1-7/8-inches tall and 1-5/8-inches wide, as shown in the photo I prepared for you. We also offer two bars as a set #RB1250. The vehicle known as the…

view full answer...

Answer 8

The dimension you are looking for on the #RR31102 is 1-1/2".

view full answer...

Answer 9

The Rhino-Rack CXB Leg Kit for Raised, Factory Roof Rack Side Rails #CXB will fit the factory rails on your 2022 Subaru Forester as long as those rails are not more than 1-1/2" tall and not more than 2-1/4" wide. This would allow you to use…

view full answer...

Answer 10

Yes, the Batwing Awning #RR33100 (Driver's Side) or #RR33200 (Passenger's Side) can be mounted to your Yakima JetStream crossbars so long as they extend out past your roof rack's feet. They have mounting brackets which install inside the…

view full answer...

Answer 11

I went ahead and checked out your order and it appears that you had actually ordered the Replacement Prop Rod Assembly for Leer Tonneau Covers #LE54MR which is meant for the Leer Latitude Soft Tonneau Cover - Folding - Vinyl and Aluminum #LE96FR and…

view full answer...