Double Lip Grease Seals With 1.68 Inch Inner Diameter and 2.33 Inch Outer Diameter
Question:
Marine master trailer 2004 vin xxxxxxxxxxxx. I was was looking for all new internals for my hubs on my boat trailer for what ever reason on the the MM website the 04 and older trailers it states the rear seal diameter is different from anything that I can find 1.68ID 2.33OD I was wanting a double lipped or better spring loaded seal if possible along with new bearings and bearing buddy caps. Thanks for any help!
asked by: Mike
Helpful Expert Reply:
We do have a double lip grease seal that has a 1.68 inch inner diameter and 2.33 inch outer diameter. What you need is the following:
- Grease Seal - Double Lip # 010-180-00
You mentioned bearings as well, but I am not sure which ones you need so I have added a link to our selection of bearings for you to check out. You can find these by either the bearing number or by the inner diameter as well. I have also added a link to our selection of Bearing Buddies, which you can find by measuring the diameter of your hub bore.
Product Page this Question was Asked From
Grease Seal - Double Lip - Inner Diameter 1.68" - Outer Diameter: 2.33" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.68 Inch I.D.
- 2.33 Inch O.D.
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Replacement Inner Members For UFP A-60 Brake Actuator On Tandem Axle Trailer
- Q&A: Correct Replacement Inner Slide for UFP A-70 Surge Brake Actuator
- Q&A: Replacement Inner Member for UFP Model A-75 Actuator
- Video: Review of Dexter Axle Replacement Inner Member - DX97FR
- Video: Review of Dexter Brake Actuator - Replacement Inner Slide - DX99FR
- Video: etrailer Trailer Hub And Drum Assembly Installation
- Video: etrailer Trailer Brakes - Hydraulic Drum Brakes - AKFBBRK-35-D Review
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Inner Member for UFP A-60 Actuator 34039
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: dx97fr
- Search Results: bk2~100
- Search Results: bearing and seal kits
- Search Results: l68110
- Shop: Demco Hydraulic Brake Kit - Free Backing - Galvanized - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Replacement Race - L68110
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Replacement Inner Member for Dexter DX7.5L Brake Actuator - Drum - 2" Ball - 7,500 lbs
- Shop: Kodiak Hydraulic Brake Hose - FIF and 90-Degree Male Fittings w/ Stainless Flares - 1.5'
- Q&A: Replacement Inner Member/Master Cylinder For Dexter A-60 Drum Brake Surge Actuator
- Q&A: Using Passenger Car Tires on Trailers
- Search Results: bearing
- Search Results: brake fluid
- Search Results: drum brake flush kit
- Video: etrailer Left and Right Hand Hydraulic Brake Kit Installation
- Q&A: Replacement Trailer Hub Seal that has Inner Diameter 1.68 inches and Outer Diameter 2.33 inch
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Double Lip Grease Seal - 010-180-00
- Video: Redline Trailer Bearings Races Seals Caps - Seals - 168233 Review