13 inch Trailer Wheel and Tire that Can Use Baby Moon Wheel Covers

Question

Question:

I have a 1997 Jayco Hawk RB 20 camper. Presently the tire size is 175 80R 13 ...5 x 4-1/2 bolt pattern. Im looking for a car style wheel same size above that I can use baby moon hub caps on. It seems there are limited style wheels in the 13inch size and bolt pattern. Why are the wagon style wheel so popular?? Im not sure on the back spacing that is needed. Any help on wheels and application would be appreciated. Thankyou

asked by: John N

1

Helpful Expert Reply:

We have a 13 inch trailer wheel that would fit with the tire size you mentioned as well as the bolt pattern mentioned with the part # AM20214. Then for a baby moon cover all you'd need is the # AM90086 and you'd be set.

If you need a tire in the size 175/80R13 we also have the # LHWL101 which would work great.

expert reply by: Jameson C

1

Answer 1

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 2

The 30" Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR have a weld on design. This is the only way to install the jacks with the included mounts as there is not enough room between the stabilizer itself and the mounting plate for additional…

view full answer...

Answer 3

Baby moon hub caps are designed to fit a conventional steel wheel that has a raised ring like in the attached photo. Americana Baby Moon Trailer Wheel Center Cap part #AM90086 will fit a conventional steel 13" wheel as long as the raised ring on…

view full answer...

Answer 4

The Phoenix USA #PX1307SS baby moon hub caps will only fit a conventional steel wheel like part #AM20514 with a 6 on 5-1/2 inch bolt pattern, because the raised lip around the lug holes is compatible with the inside dimension of the hubcap. Assuming…

view full answer...

Answer 5

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 6

Since you have a 3,500 lb axle most likely the diameter of the threaded portion of the spindle is 1 inch. You will need to verify that. And since the spindle has a hole in it for a cotter pin you would need a castle nut. For that I would recommend…

view full answer...

Answer 7

The tires you have will actually work just fine if I am reading your question correctly. The pilot hole diameter in the middle does not make a difference on the trailer wheels. Trailer wheels are lug-centered so they are only kept in place by the…

view full answer...

Answer 8

Yes, the tire size of ST185/80R13 will fit a rim that measures 13 inches in diameter and 4-1/2 inches in width like the part #AM20232. I attached a link to a page that ahs all of the 13 inch wheels we offer as well. You would want to select the bolt…

view full answer...

Answer 9

We offer two versions of a baby moon trailer hub cap. Part #AM90086 fits 13-, 14- and 15-inch 5-lug conventional steel trailer wheels like yours. Part #AM981306 has a pointed center and fits only 15-inch 6-lug wheels.

view full answer...