7-Way Bracket that Can Fit 7-Way and 4-Way Harness for 2017 Volvo XC90

Question

Question:

Hello, I am installing a hitch to my 2017 Volvo xc90, do you have a mounting bracket that will work with the Volvo factory 4/7 pin connector Volvo part number 31373661. Thanks

asked by: Adam

0

Expert Reply:

I looked up the Volvo part number you mentioned and it's basically a standard 7-way with a 4-way mounted to the side of it. The part # A10-9394VP would easily fit that connector and work well.

expert reply by: Jameson C

0

Answer 1

There is a trailer hitch receiver that fits your 2024 Mercedes-Benz Sprinter 2500, made by Curt. The correct part number is the following: - Curt Trailer Hitch Receiver #C13388

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

I would be happy to help you find a hitch receiver for your 2021 Mercedes-Benz Sprinter 2500 van with a factory step. In order to haul a trailer you are going to need a wiring harness as well. The Curt item #13358 you were looking at is the best…

view full answer...

Answer 8

The Curt #C59236 wiring you've found for your 2024 Mazda CX-90 is a universal wiring kit that essentially fits any vehicle on the market since it requires splicing into the OEM wiring of the vehicle for the installation. The Curt 56494, which is…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Mazda CX-90, I recommend the Curt Trailer Hitch item #C25FV. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. I really like this hitch…

view full answer...

Answer 10

The Curt hitch part #13358 is recessed under the step bumper like you can see in the attached picture but it's not recessed to the point it wouldn't work well. It wouldn't interfere with the camera setup either.

view full answer...

Answer 11

We haven't installed Draw-Tite trailer hitch #75549 on a 2014 Sprinter 2500 but on the 2016 model year after the hitch was installed, see video, it measured 17-1/4 inches from the ground to the top of the receiver opening. So from the ground to…

view full answer...

Answer 12

Yes the Draw Tite hitch part #75601 does attach to the outsides of the frame rails of your 2020 Mercedes Benz Sprinter 2500. You can see this in the install instructions diagram that I attached to this page.

view full answer...

7-Way Bracket that Can Fit 7-Way and 4-Way Harness for 2017 Volvo XC90

Product Page this Question was Asked From

Continue Researching