Could Metal Roof Vent Lid Fit on Trailer Roof Vent

Question

Question:

Believe I have a ventline roof vent on my enclosed cargo trailer. Measures ~14 x ~14. Trailer is an Arising make year 2018. Looking for replacement cover. Want to be sure I get correct one. Has continuous metal hinge. If there are better options durability please let me know. Thanks very much.

asked by: Patrick H

1

Helpful Expert Reply:

We have a metal lid that will fit as a replacement for what you have with the part # BV0534-00. This would be the most durable option that would hold up much better than plastic.

expert reply by: Jameson C

1

click to enlarge

Answer 1

Thanks for the pictures of your vent assembly! Based on them I was able to determine that the correct replacement lid you need is the part #BBC0530-01.

view full answer...

Answer 2

I've attached one of our installation videos that covers the process, but it's extremely simple. All you'll do is untwist a tab on each side of the old hinge to allow it to slide off; then slide the new Ventline Cover #BBC0530-01 onto the…

view full answer...

Answer 3

The LaSalle Bristol XTRM Self-leveling Sealant part #34427034145-1 is very comparable to the Dicor 501LSW self leveling lap sealant. I can't say exactly what the formula is for Dicor but I can tell you that LaSalle Sealant is a silicone sealant…

view full answer...

Answer 4

You'd want to do the Heng's rubber coating on the roof first as needed and then use the LaSalle Bristol XTRM Universal Self-Leveling Sealant #34427034145-1 when re-installing the vents. You'd want to follow the curing instructions on the…

view full answer...

Answer 5

The sealant I recommend for your 2009 Fleetwood Bayside pop-up is the LaSalle Bristol XTRM Universal Self-Leveling Sealant #34427034145-1. It is designed to work on roofs and is weather-resistant; this sealant is White though there is also Beige at…

view full answer...

Answer 6

I do have an option for you but there is not an upgrade kit for a Fan-Tastic Vent E-Z Breeze Model 600 Vent Fan. Therefore, you will need to replace this for which I recommend using the Fan-Tastic Vent Model 2250 Roof Vent Fan part #FV802250 as it…

view full answer...

Answer 7

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Could Metal Roof Vent Lid Fit on Trailer Roof Vent

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching