Trailer Hitch Receiver for 2009 BMW 328i Coupe

Question

Question:

I see that they dont offer a hitch for the convertibles. Can you tell me if a 2009 bmw 328i 2 door coupe is able to have a hitch put on?

asked by: Brad

0

Expert Reply:

There is one manufacturer that makes a trailer hitch receiver that fits a 2009 BMW 328i coupe, Stealth Hitches. They are a completely hidden hitch that does not show any part of the tube, and has a receiver or ball mount that gets removed so it's like you don't even have a hitch on.

There are two options, depending on if you are only using the hitch for accessories like a bike rack or cargo carrier, or also towing. The one for accessories comes with just a receiver that cannot be used for towing, while while the one for accessories and towing comes with a receiver and a ball mount.

- Accessories Only: Stealth Hitches Hidden Rack Receiver # SH44VR

- Accessories and Towing: Stealth Hitches Hidden Trailer Hitch Receiver with Towing Kit # SH88VR

expert reply by: Kyle S

0

Answer 1

For your 2008 BMW M3, you will want the Stealth Hitches Hidden Rack Receiver - Custom Fit - 2" #SH97VR for a bike rack or accessory. If you want to do light towing as well you will instead use the Stealth Hitches Hidden Trailer Hitch Receiver w/…

view full answer...

Answer 2

Yes, the Stealth hitch part #SH88VR does fit your 2011 BMW 328i xdrive sedan and would provide a 2 inch hitch for a bike rack. This comes with other components you may not need like wiring and a ball mount so you might be more interested in the…

view full answer...

Answer 3

I recommend the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit #SH88VR for your 2011 BMW 328i xDrive Coupe. This kit includes the 2" receiver mount for your hitch mounted accessories and the 2" ball mount with 4-way flat wiring…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Trailer Hitch Receiver for 2009 BMW 328i Coupe

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching