Can the SportRack Pop-Up Camper Roof Rack Be Installed In Roof Rails On a Tent Trailer

Question

Question:

We have 2007 Fleetwood Sun Valley tent trailer that has two rails on it already. They are about 78 inches apart. Will I be able to attach sports rack crossbars without drilling and how do you attach. Is there some type of screws. Rails on trailer do not have holes in them

asked by: Brenda R

1

Helpful Expert Reply:

The SportRack Pop-Up Camper Roof Rack part # SR1020 can be installed one of two way, via drilling into the roof or via integrated tracks (if present). It comes with the hardware needed for either installation. If you have the integrated tracks then the crossbars get secured to this using a spacer block and bolt which you can see in the photo below.

expert reply by: Conner L

1

click to enlarge

Answer 1

No it is not, to install this SportRack Pop-Up Camper Roof Rack #SR1020 you need to drill 1/8 inch holes through the exterior of your camper, and then use the self tapping screws to hole the rack to the camper.

view full answer...

Answer 2

We may have a roof rack that will fit your Sunset Park Sunray, although no roof racks designed specifically for this trailer. The option I recommend checking out is the SportRack Pop-Up Camper Roof Rack #SR1020. This rack is designed to fit trailers…

view full answer...

Answer 3

The SportRack Pop-Up Camper Roof Rack #SR1020 is a semi-custom roof rack system for pop-up campers that will fit on a wide range of camper sizes. The adjustable cross bars can be set for either 80-, 83- or 86-inch length. The included 4 roof-rack…

view full answer...

Answer 4

For pop ups like your 2015 Rockwood Freedom 2318G the SportRack Pop Up roof rack part #SR1020 is a really great option. I attached a link to the install instructions on this page for this rack as well as a picture that shows it installed as well.

view full answer...

Answer 5

Roof racks made for the tops of pop-up trailers and in-bed campers do typically require drilling for installation. The SportRack #SR1020 rack is intended for camper tops that do not have rounded or curved edges on the roof. The mounting brackets…

view full answer...

Answer 6

The SportRack Pop-Up Camper Roof Rack #SR1020 installs on the roof of your pop-up camper by first picking out the desired location of the roof rack. You will then take a 1/8-inch drill bit and drill holes through the roof that line up with the holes…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Can the SportRack Pop-Up Camper Roof Rack Be Installed In Roof Rails On a Tent Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching