Is Brake Buddy Stealth HM39530 Current Version

Question

Question:

Per the manufacturer, on the newer system Version the cable on the main unit can be easily removed without having to open the main unit plug in?? Can you please confirm if the version you are selling is the newer one where the cable can be easily removed and exchanged if ever necessary?

asked by: TT

1

Helpful Expert Reply:

The version of the Brake Buddy Stealth part # HM39530 we offer is the most current version. What you'd receive has the easily removed plug.

expert reply by: Jameson C

1

Answer 1

If you're talking about the two dots on the left side of the Brake Buddy Stealth #HM39530 controller (A) those are mode indicator lights that will display regardless of whether the towed vehicle or trailer is connected. You'll want to test…

view full answer...

Answer 2

Sure, for your Brake Buddy Stealth Supplemental Braking System #HM39530, you are going to want to connect the: - Blue Wire - To your vehicle's 7-way connector, and will tell the brakes to activate. - White Wire - Will get spliced into your…

view full answer...

Answer 3

The Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor - Proportional #DM86VR and Brake Buddy Stealth Supplemental Braking System - Proportional #HM39530 are very similar systems with only a few differences. The first…

view full answer...

Answer 4

Yes, I suggest the Brake Buddy Stealth Supplemental Braking System - Proportional, #HM39530. This too is a a proportional braking system that remains in the Jeep same as the Demco. It is an equivalent product to other originally recommended from a…

view full answer...

Answer 5

You'll need to install the vacuum pump of the Hopkins Stealth #HM39530 near the main brake booster hose to ensure it can work properly. Vacuum lines can get pretty complicated as at various part of the setup there might be a reducer installed…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hey Ken, so the first thing you will need is a base plate kit like the Blue Ox part #BLU85CR which fits your 2023 GMC Canyon and would be compatible with your Blue Ox tow bar. I do not know what braking system you had in the past but for a permanent…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

view full answer...

Is Brake Buddy Stealth HM39530 Current Version

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching