Recommended 7-Way Wiring Connector for 1996 Ford F-250 XL With Factory Plug At Rear
Question:
I am looking to install wiring from the single plug connector that is capped, factory. The Ford own harness is part number F6TB 13A576 VS which is pretty much non available now. My question is this what products do you offer for a replacement? I would like to use the current wiring plugs that are there knowing a t connector will be needed I think to pick up the lights. What products would work to achieve this?
asked by: Eric T
Expert Reply:
On your 1996 Ford F-250 XL with factory trailer connector I recommend the 4-way # 118316 for a 4-way and then if you want a 7-way use # 37185 and connect to the factory wiring on the driver's side frame rail.
If you already had the factory 7-way then you can just use replacement # HM40950. We don't have the custom replacement part you are seeking.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Hopkins Endurance Multi-Tow 7-Way RV and 4-Way Flat Trailer Connector - Vehicle End
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- Plug Only
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller Installation on a Ford Full-Size Van
- Q&A: How to Measure to See if Curt Hitch part # C15300 will Fit Truck
- Q&A: Replacement Wheel Cylinders For Dexter Brake Assemblies On An M1101 Trailer
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Q&A: 4-Way Trailer Wiring Recommendation for 1991 Ford F-150
- Q&A: Distance Between Mounting Holes On B&W Heavy-Duty Trailer Hitch Receiver For 1996 Ford F-150
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Axle, Brake Assemblies, And Hubs And Drums For M1101 Trailer
- Q&A: How Does the Hopkins 7-Way part # HM40975 Wire to a Vehicle
- Q&A: Fit of Curt Class V Receiver Part # C15300 on 1992 Ford F250 with 10 Inch Drop Aftermarket Bumper
- Article: Brake Controller Installation on a Full-Size Ford Truck or SUV