Can Furrion Camera Install on Truck to Help when Connecting to Trailer

Question

Question:

I currently have a Furrion backup camera that came with my trailer, is there a camera I can use for my truck when backing up to the hitch that I can use with the same monitor as the camper camera?

asked by: Rob C

0

Expert Reply:

You could install the FCN48TASF on your truck and you'd be able to toggle to this view on your Furrion camera setup.

expert reply by: Jameson C

0

Answer 1

I'd go with the Furrion Vision S system part #FOS05TASF with the additional camera #FCN48TASF and you'd have a setup that would install relatively easy and provide you with the best wireless reception.

view full answer...

Answer 2

For your application you will need the Furrion Vision S Wireless RV Backup Camera w/ Night Vision #FCN48TASF. This will have to be a custom job since your truck doesn't have provisions for this camera, but there aren't any other…

view full answer...

Answer 3

There are LED amber clearance lights that are very similar if not an exact match to the clearance lights of the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras #FR98NR. The amber lights themselves measure…

view full answer...

Answer 4

To set the Furrion Vision S Wireless RV Observation Camera System #FR98NR so that it could be used like a security system would require you to power the cameras from the RV battery instead of the running lights or reverse lights. This allows you to…

view full answer...

Answer 5

The Furrion Camera Systems such as #FCN48TASF are only compatible with the Furrion Monitors. If you're looking for a back up camera system for hauling a camper I recommend the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision…

view full answer...

Answer 6

There is no longer a compatible replacement camera available for your older Furrion system. This particular system has been replaced and the new replacement camera #FCN48TASF is not compatible. I confirmed this with my contacts at Furrion. You'll…

view full answer...

Answer 7

I hope we get a solution for what you are wanting but at this time Furrion does not have a way to integrate their Vision S systems like the #FOS05TASF into the Chevy displays. At this time (June 2021) you'd have to stick to using the monitor that…

view full answer...

Answer 8

Yes, you can up to three additional cameras to the Furrion RV Observation Camera System part #FOS05TASF. For the side of your trailer, I recommend using the Furrion Vision S Side Camera w/ Marker Light Bracket part #FCE48TASL which is also a built in…

view full answer...

Answer 9

It sounds like the Removable Steel Foot with Pin for DL22530 A-Frame Trailer Jack by Dutton-Lainson, item #DL22541, will be the closest fit we have for your trailer jack. This foot plate has an inner diameter of 1-3/4 inches which is slightly larger…

view full answer...

Answer 10

The issue that you're facing with your Furrion camera System #FOS05TASF can be solved in two ways: 1. By using the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera #FR87PR. This adapter will send a steady current to…

view full answer...

Answer 11

The Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen Item #FOS05TASF cannot be wired as both a back up camera and an observation camera. Your 2021 Riverside RV Intrepid 235RB is prepped for a Furrion…

view full answer...

Answer 12

I can help you understand the reason there is different information on our website. Special trailer tires have a maximum speed rating, just like passenger car and truck tires. Older tires have no special marking to designate a limit. Their maximum…

view full answer...

Can Furrion Camera Install on Truck to Help when Connecting to Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching