Replacement Leaf Springs for Trailer with 2,500 lb Axles
Question:
Hello, I have a 2000 Tracker Marine single axle boat trailer with a GAWR of 2500 lbs and max load carrying capacity of 2000 lbs. Im searching for new leaf springs as they are very corroded. My father-in law took off the springs without measuring them while on the trailer. The spring measures 25-3/4inch eye to eye while off the trailer. On the trailer, the hanger and shackle mounting holes are 25-1/2inch apart, center to center. The hanger measures 3-1/4inch long center to center. What length of spring do I need to purchase? Thanks in advance for your help!!!
asked by: Tony F
Expert Reply:
The most ideal leaf spring we have for you is the part # e66SR which is rated for a 2,500 lb axle. It's a little short for your application though at 25-1/8 inches. Ideally you'd have a spring just a little longer than 25-1/2 inches since that's distance between your hanger bolts.
So what this means is that you'd need a new hanger kit too like with the part # APS4.
Products Referenced in This Question
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Product Page this Question was Asked From
3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 2500 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 25-1/8 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Shop: 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long
- Q&A: How to Determine the Capacity of Trailer Leaf Springs and How to Raise the Coupler Height
- Q&A: How to Measure Trailer Leaf Spring to Find Correct Replacement
- Search Results: trailer ramps
- Search Results: boat trailer steps
- Shop: 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8" Long
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Single Axle Trailer Fender w/ Backing Plate - Ribbed Steel - 13" to 14" Wheels - Qty 1
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Shop: Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs - Qty 1
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Q&A: Is Backing Plate on Single Axle Trailer for 13" to 14" Wheels Tack Welded Into Place
- Q&A: How to Measure for a Replacement Trailer Axle
- Q&A: Solution for Needing Replacement Leaf Spring for 1883 Trailex Boat Trailer
- Q&A: Replacement 8 Inch x 27 Inch Boat Trailer Fender Recommendation
- Q&A: 1999 Trailstar Bass Tracker Boat Trailer Replacement Leaf Spring
- Search Results: 3000 lb axle spring
- Search Results: 25 1 2 leaf springs
- Search Results: 25 12 leaf spring
- Shop: Trailer Hitch
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Fifth Wheel Hitch
on Trailer Suspension Parts
