2019 Subaru Ascent Limited Tow Mirror Recommendation

Question

Question:

I have a 2019 Subaru Ascent Limited and need side mirror extenders....what do you suggest? Thanks

asked by: Dave K

0

Expert Reply:

The best option for tow mirrors for a 2019 Subaru Ascent are the CIPA universal mirrors part # 11953-2 as we've had the chance to install and use them on a similar 2020 Subaru Ascent and found the fit well and provided a great view behind the vehicle and trailer thanks to the very stable dual mirror face setup.

Check out the install video I attached and the picture that shows the mirrors installed on a similar Ascent as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

We do have a couple options available for the 2020 Subaru Ascent. The best options are either, my preferred, the CIPA Universal Fit Towing Mirrors, #40375-2 or the CIPA Universal Dual Lens Towing Mirrors - Clip On, #11953-2. Unfortunately we not have…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The absolute best towing mirrors for your 2024 Ford F-150 are the K-Source Snap & Zap Custom Towing Mirrors #KS69NQ because they slip on over your OEM mirrors for a great fit that minimizes how much road vibration you see in the mirrors. We had…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 11

I do see the BAKFlip MX4 Hard Tonneau Cover #BAK52FR you found is for a short CarbonPro bed on your 2024 GMC Sierra 1500 Denali. This will interfere with the 3rd brake light bed camera on your truck. I recommend looking at the Pace Edwards…

view full answer...

Answer 12

Then I do have some good news for you Rick. The BAKFlip MX4 Hard Tonneau Cover #BAK448130 will not block the camera on your 2024 GMC Sierra 1500 Denali short bed truck. This is the correct cover for your truck not having the CarbonPro bed.

view full answer...