Can I Use the RhinoRack T-Load Hitch Mounted Load Assist and Support Bar

Question

Question:

We are thinking that this could work on our 2017 4runner going into the rear with the electric rear window down and not going on the roof at all Your thoughts? Thank you

asked by: Dean G

0

Expert Reply:

You would need to find a way to keep the kayak level inside the vehicle, but I don't see any reason why you couldn't use the Rhino Rack T-Load Hitch Mounted Load Assist and Support Bar # RTL002 on your 2017 Toyota 4Runner in this manner.

expert reply by: Erik B

0

Answer 1

Yes, the Curt Trailer Hitch Receiver #C26VV will fit your 2024 Toyota Grand Highlander hybrid. I have included an image below that was sent to us of the receiver installed on a hybrid. I always recommend installing at least a 4-Way #C59236 when you…

view full answer...

Answer 2

To haul two kayaks on a pickup truck rack system that does not over hang past the cab, and does not use the hitch receiver you will need a full rack on the bed of the truck. Consider the Erickson #EM07706 truck bed rack that supports 800 pounds!

view full answer...

Answer 3

We do! It sounds like you're looking for the Du-Ha Truck Storage Box and Gun Case #DU50074 which installs under the rear seat of your 2023 Honda Ridgeline. This kit comes with the ability to be an empty box or you can install the inserts to hold…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

I have attached a picture below of the Curt Hitch item #C26VV installed on a 2024 Toyota Grand Highlander. I really like this hitch because the crosstube installs behind the rear bumper leaving only the 2" receiver exposed. The Curt Hitch item…

view full answer...

Answer 9

No, you will not have to cut, drill or modify the vehicle in any way when installing the Curt #C26VV on a 2024 Toyota Grand Highlander. This is actually about as easy of a hitch installation as you will see. You will just lift the hitch into place,…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

Since your 2024 Toyota Grand Highlander doesn't come with the factory tow package you need the Curt T-Connector Vehicle Wiring Harness #C79VV. The module plugs into that 10-Pin connector you found under the cup holder and then the 4-Way harness…

view full answer...

Answer 12

The hands free liftgate of your 2024 Toyota Grand Highlander will still function with the Curt hitch part #C26VV installed but you would need to kick to either side of the hitch opening. Since the exhaust actually hangs lower than the hitch it…

view full answer...

Can I Use the RhinoRack T-Load Hitch Mounted Load Assist and Support Bar

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching