Is the Lippert 1621 5th Wheel Pin Box part # LC1191191 Certified

Question

Question:

Hi , Is this built to any Standards like SAE or British or ISO standards,

asked by: PRADEEP R

0

Expert Reply:

Yes the Lippert 1621 5th Wheel Pin Box part # LC1191191 is SAE J2638 certified under the gooseneck and fifth wheel attachment performance for models up to 30,000 lbs. capacity.

expert reply by: Randy B

0

Answer 1

Ideally you will have at least 5 to 6 inches of clearances between the top of the truck bed rails and the 5th wheel trailer overhang. I attached a helpful image to assist. There are a few things you can do if you're having trouble…

view full answer...

Answer 2

When adjusting the height of a pin box such as #LC1191191 it is important to support the pin box when removing the bolts. I recommend 2 or 3 buddies to give you a hand and make sure no one is beneath the pin box while raising or lowering it. With…

view full answer...

Answer 3

The Trailair Flex Air 5th Wheel Pin Box #LC369535 you mention will replace Lippert 1621 pin boxes, so if you have a 1621 pin box this will work for you. If you are unsure which pin box you currently have, you should be able to locate the…

view full answer...

Answer 4

The Trailair Flex Air 5th Wheel Pin Box part #LC369535 which is rated for 21,000 lbs is constructed of a thicker metal and also has beefier welds when compared to the Trailair Flex Air 5th Wheel Pin Box part #LC328492 which is rated for 18,000 lbs.…

view full answer...

Answer 5

The MORryde Cushioned 5th Wheel Pin Box #MR74VR (11,501-14,000lbs) is the correct replacement for the pin box on your 2021 Grand Design Reflection 303RLS. This pin box has the correct bolt pattern(1621) and weight capacity(11,995lbs GVWR) for your…

view full answer...

Answer 6

The best option we have for your situation where the brackets of your pin box mounting are damaged is going to be with the Lippert 1621 5th Wheel Pin Box #LC1191191 which you can weld to the frame you have currently that you are reinforcing.

view full answer...

Answer 7

I spoke to Lippert but they were not able to identify the pin box with this information unfortunately. Therefore, the only option to identify the pin box would be through measuring. I have attached an article that shows how this is done. If you can…

view full answer...

Answer 8

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 9

I reached out to the manufacturer and got the specs for both the Lippert 1621 5th Wheel Pin Box #LC1191191 and the Trailair Rota-Flex #LC328330 which it is designed to replace. These pin boxes have very similar dimensions, though the the Rota-Flex is…

view full answer...

Answer 10

The longer (Lippert 1716 part #LC1324791) pin box will give you more clearance to open your tailgate than the shorter (Lippert 1116 part #LC1270271) pin box so if more room is what you are looking for then the Lippert 1116 Pin Box part #LC1324791…

view full answer...

Answer 11

I spoke with my contact at Lippert regarding the existing Lippert 1716 Pin Box #LC1324791 on your trailer. He stated that you can actually replace the pin box with the Lippert 1116 Pin Box #LC1270271, which is shorter than what you have but uses the…

view full answer...

Answer 12

If you're trying to raise the trailer nose to level it out while towing or gain a bit of clearance between the nose of the trailer and the bedrails of your truck then you can move your pin box down on the mounting ears, if space allows. On a pin…

view full answer...

Is the Lippert 1621 5th Wheel Pin Box part # LC1191191 Certified

Product Page this Question was Asked From

Continue Researching