Westin R5 Running Boards Recommendation for 2020 Ram 3500 Crew Cab

Question

Question:

need passenger side back bed running board an 2 pads

asked by: Jerry F

0

Expert Reply:

For your 2020 Ram 3500 Crew Cab we have a set of the Westin R5 steps you are looking for with part # WE79FR.

expert reply by: Jameson C

0

Answer 1

We have a version of the MORryde X-Factor Crossmember that was designed for standard frame hangers with the part #MR33WR which would be what you want.

view full answer...

Answer 2

I spoke with my contact at Lippert about the Underchassis Double Bin Storage Unit, part #LC236558. They told me that the mounting angle brackets are 1 inch wide. They gave me the distance from the end of the storage bin to the edge of the mounting…

view full answer...

Answer 3

I forwarded your photo to the folks at Sumo Springs, and was told that as long as the spring mounts so its level and doesn't rock back and forth, you'll be just fine. From what's shown in your photo, everything looks like it's nice…

view full answer...

Answer 4

Since the MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR can fit stock suspension it can also work with the Lippert Equalizer upgrades as well such as the part #LC279688. This would make a substantial improvement…

view full answer...

Answer 5

The correct crossmember support depends on the suspension you have on your 2015 27.5 ft. Jayco 5th wheel. Unfortunately that is not information we have, so you will need to take a look at your suspension to pick the correct option. I have listed the…

view full answer...

Answer 6

The MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR includes one adjustable crossmember. Your existing hardware will be too short due to the extra thickness of the crossmember, so you will need to add #MR58ZR if…

view full answer...

Answer 7

Adding one MORryde X-Factor Crossmember #MR33WR to your 2019 Grand Design Reflection 230RL will definitely help. However, for full support and stability on a tandem axle 5th wheel like yours you want to install 3. These attach to the leaf spring…

view full answer...

Answer 8

The correct MORryde X-Factor Crossmember for the MORryde CRE3000 Equalizers is part #MR33WR. It bolts to the center leaf spring hanger so you only need one for a tandem axle trailer. It doesn't require anything else, it will work with you…

view full answer...

Answer 9

We've checked with MORryde in the past and with the Road Armor equalizer setups they've told us that the #MR33WR will work.

view full answer...

Answer 10

The only time adding something like the MORryde X-Factor Crossmember #MR33WR would affect a warranty is if it caused some type of damage to occur to the trailer. This is essentially just more bracing to help stabilize your trailer even more so you…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Westin R5 Running Boards Recommendation for 2020 Ram 3500 Crew Cab

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching