What Is Needed To Install MORryde X-Factor Crossmember for the MORryde CRE3000 Equalizers

Question:

Would like to install: MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension Item # MR33WR Installing on my 2022 Jayco Eagle HT 29.5BHDS tandem axle fifth wheel. Already has the MORryde CRE 3000s factory installed from Jayco I will have the 3 crossmembers just want to be sure on any additional hardware i.e. wet bolts, bushing or shackles, that may be needed for proper install and if so which part numbers and quantity? Also was hoping to add some gas shock absorbers and was hoping to find out if there is a bolt on product that you offer that will be compatible with this fifth wheel if adding the Crossmembers or should I plan on a custom fab and weld of some brackets to recieve the shocks? Any thoughts, ideas and advice, guidance is greatly appreciated and welcomed! Thanks in advance!

asked by: Jeremy Y

Expert Reply:

The correct MORryde X-Factor Crossmember for the MORryde CRE3000 Equalizers is part # MR33WR. It bolts to the center leaf spring hanger so you only need one for a tandem axle trailer. It doesn't require anything else, it will work with you existing shoulder bolts and shackle straps, these are independent of the system.

In regards to shock absorbers, we do offer mostly bolt-on kits although they don't integrated with anything from MORryde. The Roadmaster Comfort Ride Shock Absorbers are what I recommend, part # RM-2450 or part # RM-2460 should work although you really won't know till you mock everything up.

expert reply by: Conner L