Replacement Handle Needed for Waste Valve on 2017 Heartland Trail Runner 25SLE

Question

Question:

I have a 2017 Heartland trailrunner 25SLE. I went camping last weekend and when I went to dump my tanks I saw that my handle for the waste tank was missing. Which handle kit do you recommend and do I have to have some type of clamp to keep handle from hanging down?

asked by: Robert W

0

Expert Reply:

If you're just needing the handle part of your waste valve then you should be able to use either the Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves # 34490CMA1G which uses a screw to install, or the Replacement Handle for Bladex and Valterra Waste Valves # T1003-6MNVP which threads onto the waste valve. If you aren't sure what you have just send me some photos and I can try to help you out.

Since these handles use threads to install you shouldn't have any problems with them coming off even if they are hanging upside down. If you wanted to add something extra to help keep the handle in place then you might consider a little thread locker to help keep it installed.

expert reply by: Jon G

0

Answer 1

I'll be happy to help you find the best roof rack solution for the flush rails on your 2019 Lexus GX 460. For your application I highly recommend the Yakima JetStream roof rack system because it is a high quality system that is built to be…

view full answer...

Answer 2

We can absolutely get your 2017 Lexus GX 460 with flush mounted rails set up for a roof rack so you can use a cargo box, and the best option is a rack from Inno. The reason I like this option the most is because they have low-profile, aerodynamic…

view full answer...

Answer 3

While the best and most certain way to tell if your 2018 Ford F-250 has the puck system is to call your local Ford dealer with your VIN, it should be pretty easy to tell otherwise. If your bed looks like the accompanying photo - with four accessible…

view full answer...

Answer 4

I reached out to Lippert and your 346005 control module was replaced with the Replacement Control Module for Lippert Ground Control 3.0 Leveling System #LC85ED. To use this control module they said you must have the Control Panel #LC421484 otherwise…

view full answer...

Answer 5

While I do have a potential solution for you, we do not carry a kit that would allow you to to use a TDE brakeaway on a Dexter LP75 actuator. TDE is no longer is business, so finding compatible parts may be near impossible. We do have a replacement…

view full answer...

Answer 6

You can absolutely use the Firestone Coil-Rite Air Helper Springs #F4135 on your 2019 Toyota 4Runner with the Kinetic Dynamic Suspension System (KDSS). This dynamic system will not affect the helper springs because the springs are installed inside…

view full answer...

Answer 7

We do have the correct replacement for your Atwood 71119 landing gear motor, which is what is shown in your photo. The replacement part is the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor #LC141893. I have added a link to a…

view full answer...

Answer 8

The left side is the driver side, right side is passenger side. On a trailer brake assembly like #23-105 the arm that the magnet is on points to the front of the trailer and the magnet always will be on the bottom. I have included a picture that…

view full answer...

Answer 9

To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.

view full answer...

Replacement Handle Needed for Waste Valve on 2017 Heartland Trail Runner 25SLE

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching