Will the Air Lift Spring Spacers for LoadLifter Air Helper Springs Work On Firestone Air Bags

Question

Question:

Will this part work with part number 52420 Firestone airbags?

asked by: Aaron H

0

Expert Reply:

Yes, the Air Lift Spring Spacers for LoadLifter Air Helper Springs part # AL52420 will work with Firestone Ride Rite Air Helper Springs.

expert reply by: Conner L

0

Answer 1

I have a solution for you. Unfortunately, the Firestone #F2366 are not designed to work with the Air Lift air springs. Air Lift has part #AL52420 which is for a 2 inch lift. They're made of steel and work with the LoadLifter kits like what you…

view full answer...

Answer 2

If the lift you installed added height to the suspension between the frame and the axle you would need a 2 inch spacer when installing the part #AL57204 with the part #AL52420 which will take up the extra space created. Since you asked where it…

view full answer...

Answer 3

The 2 inch lift Air Lift Universal Air Spring Spacers for LoadLifter 5000 and 7500XL #AL52420 have a diameter of approximately 4-1/2 inches. They are designed to not only work with the Air Lift LoadLifter 5000 and 7500XL but you can also use them…

view full answer...

Answer 4

Your tandem axle trailer's equalizers handle the task of evening out the load across the two axles. I noted that in your photo the axles appear to have different tires installed on each. It is best to use identical tires on both axles, meaning…

view full answer...

Answer 5

Hey Richard, thanks for reaching out! The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57541 does take up the same space as the Curt 19419346 5th wheel bracket kit for your 2024 GMC Sierra 3500. The only way to remedy this is to use the…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will the Air Lift Spring Spacers for LoadLifter Air Helper Springs Work On Firestone Air Bags

Product Page this Question was Asked From

Continue Researching