Is AGM Group 24 Battery Size the Same as Lead Acid Group 24

Question

Question:

Are AGM group 24 12V batteries the same size as lead acid batteries?

asked by: Ed Z

0

Expert Reply:

The standard AGM 24 battery dimensions are 6 3/4" Width x 9 7/9" Height x 10 7/8" Length which is a very common size. AGM or lead acid Group 24 size batteries would be the same size.

expert reply by: Jameson C

0

Answer 1

The TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs like part #TLS9529-2-LK will work with all TorkLift frame mounted camper tie downs. The TorkLift hitch and extension won't have an affect on the fit of the turnbuckles.

view full answer...

Answer 2

I recommend using the Tow-Rax Battery Box #329-HM426 for your upgraded 6V Trojan batteries. This box has internal dimensions of 11-25/32" long, 8-27/64" wide, and 10-15/16" tall which should be more than enough space to fit one…

view full answer...

Answer 3

The hardware with the Go Power Retreat Expansion Kit part #34272634 work out great for wood as most of the RV roofs now days are wood with a rubber overlay. When mounting the panels the Alpha Systems Q130 Butyl Tape part #AL33FJ and the Alpha Systems…

view full answer...

Answer 4

I recommend the NOCO Commercial Grade battery box part #329-HM484 to hold both of the group 24 batteries. From my research a group 24- 12 volt battery measures 10.25" long x 6.8125" wide x 8.875" tall. This battery box measures…

view full answer...

Answer 5

I looked up the dimensions of the Optima Yellowtop deep cycle batteries and one would easily fit in the NOCO Commercial Grade Battery Box #329-HM426 that you referenced with room to spare. The internal dimensions of this are 14-5/8" long x…

view full answer...

Answer 6

Group 27 batteries are typically 12" L x 7" W x 9" T so I'm assuming your 14" x 14" measurement is just the two batteries butted up against each other. The options that we carry wouldn't really work with the long…

view full answer...

Answer 7

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Is AGM Group 24 Battery Size the Same as Lead Acid Group 24

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching