Is There a Plug-In-Play Flat-Tow Wiring Harness for a 2019 Jeep Grand Cherokee

Question

Question:

Do you have one for a 2019 jeep grand Cherokee? I don’t see one?

asked by: Randy F

0

Expert Reply:

It sounds like you are looking for a flat-tow wiring harness for a 2019 Jeep Grand Cherokee and if that is the case we have some great options. That said, none of which are plug-n-play but the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 is our most popular and works really well. It only requires a few splices into the vehicle so very little modifications.

The TowDaddy Custom Tail Light Wiring Kits are very old and no longer made.

expert reply by: Conner L

0

Answer 1

Yes. You will need to purchase and install Mopar flat-tow wiring kit 68321424AB before flat towing your vehicle, as per Jeep tech bulletin (08-010-17). This kit is available at your local Chrysler and Jeep dealership. I've attached a photo of…

view full answer...

Answer 2

Hopkins has a universal style tow bar lighting solution they list as a fit for your 2018 Jeep Grand Cherokee which is part #HM55999. There isn't a custom fit kit that would plug in line with the taillight connectors though.

view full answer...

Answer 3

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 4

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this…

view full answer...

Answer 5

Hey Michael, The Falcon 5250 has direct-connect attachment points that hook onto a crossbar, if you remove the crossbar adapter then you'll be able to go with a direct-connect baseplate like the #RM77ZR (models with tow hooks) or #RM76RR…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The Blue Ox Patriot Portable Braking System - Proportional #BLU37TR, uses a 12V powered remote that wirelessly connects to the 12V powered braking unit. This wireless remote has an inertia-based sensor in it that can sense the braking of the towing…

view full answer...

Answer 10

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available,…

view full answer...

Answer 11

2024 models of the Chevy Equinox have the same steps listed as the 2023 models to get the vehicle ready to flat tow: 1. Position the vehicle to be towed and secure it to the towing vehicle. 2. Start the vehicle. 3. If equipped with AWD, engage the…

view full answer...

Answer 12

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to…

view full answer...