DoubleDown Replacement Cradles Y8890177 on Non-Yakima Bike Rack

Question

Question:

Hey, I was hoping you could tell me what diameter bar the cradles fit I am hoping to install them on a non-yakima rack. Thank you for your assistance. Stephen

asked by: Stephen T

0

Expert Reply:

According to Yakima, the replacement cradle set fits bike rack bars up to 1-1/4 inch diameter.

expert reply by: DeAnne T

0

Answer 1

The Replacement Cradle Set #Y8890177 works with tubes 1-1/4" in diameter, so this will work on your Yakima rack that you've specified has 1-1/4" tubes. For reference, it's likely that you have a Yakima DoubleDown rack similar to the…

view full answer...

Answer 2

We have the replacement cradles that you are looking for. They are the Replacement Cradle Set for Yakima DoubleDown Hitch Mounted Bike Carriers, item #Y8890177, and you will receive all the parts needed to secure one bike on the Yakima DoubleDown 4…

view full answer...

Answer 3

The Replacement Anti-Sway Cradles #SP499 have a hole diameter of 1-3/16 inches. This may fit nicely over your 1" bar but it is specifically made for the Swagman Titan and Swagman Trailhead bike racks and we have not tested it on other bike…

view full answer...

Answer 4

Thank you for the photo of your bike rack cradle/strap assembly that requires a replacement. We do carry all sorts of replacement parts for bike racks from many makers, including straps and complete cradle assemblies. Links to both categories are…

view full answer...

Answer 5

From the pictures you sent in it looks like you have an older version of the SportRack Ridge Swing 4 Bike Rack #SR2415. I do have some replacement parts that could work, but unfortunately there aren't any specific replacement pieces. What I'm…

view full answer...

Answer 6

The anti-sway cradles that come with the Replacement Anti-Sway Cradles for Swagman Titan or Trailhead Bike Rack part #SP499 are designed for a 1-1/8" diameter bar. If your bar is much larger than this then the cadles most likely won't work…

view full answer...

Answer 7

The Replacement Anti-Sway Cradles for Swagman Titan or Trailhead Bike Rack #SP499 are designed for a 1-1/8" diameter bar (1-2/16") and fit over a protrusion on the bar. I have included a picture of these on a Swagman bar with protrusion on…

view full answer...

Answer 8

The Replacement Cradle #RG8890084 will also fit a 1" diameter bar. It is designed for Rhode Gear bike racks as a replacement. The Swagman Replacement Anti-Sway Cradles #SP499 that you found are designed for a 1-1/8" bar. They would not fit…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

DoubleDown Replacement Cradles Y8890177 on Non-Yakima Bike Rack

Product Page this Question was Asked From

Continue Researching