What Size Diameter Tubes Does the Replacement Cradle Set Y8890177 Fit?

Question

Question:

What size tube will this part work on? My Yakima rack has 1 1/4 inch tubes.

asked by: Richard G

0

Expert Reply:

The Replacement Cradle Set # Y8890177 works with tubes 1-1/4" in diameter, so this will work on your Yakima rack that you've specified has 1-1/4" tubes. For reference, it's likely that you have a Yakima DoubleDown rack similar to the DoubleDown 4, which has 1-1/4" diameter tubes (it also comes in 2 bike or 5 bike configurations).

expert reply by: Erik B

0

Answer 1

Thank you for the photo of your bike rack cradle/strap assembly that requires a replacement. We do carry all sorts of replacement parts for bike racks from many makers, including straps and complete cradle assemblies. Links to both categories are…

view full answer...

Answer 2

We have the replacement cradles that you are looking for. They are the Replacement Cradle Set for Yakima DoubleDown Hitch Mounted Bike Carriers, item #Y8890177, and you will receive all the parts needed to secure one bike on the Yakima DoubleDown 4…

view full answer...

Answer 3

From the pictures you sent in it looks like you have an older version of the SportRack Ridge Swing 4 Bike Rack #SR2415. I do have some replacement parts that could work, but unfortunately there aren't any specific replacement pieces. What I'm…

view full answer...

Answer 4

The Replacement Cradle #RG8890084 will also fit a 1" diameter bar. It is designed for Rhode Gear bike racks as a replacement. The Swagman Replacement Anti-Sway Cradles #SP499 that you found are designed for a 1-1/8" bar. They would not fit…

view full answer...

Answer 5

The Replacement Anti-Sway Cradles for Swagman Titan or Trailhead Bike Rack #SP499 are designed for a 1-1/8" diameter bar (1-2/16") and fit over a protrusion on the bar. I have included a picture of these on a Swagman bar with protrusion on…

view full answer...

Answer 6

The anti-sway cradles that come with the Replacement Anti-Sway Cradles for Swagman Titan or Trailhead Bike Rack part #SP499 are designed for a 1-1/8" diameter bar. If your bar is much larger than this then the cadles most likely won't work…

view full answer...

Answer 7

The Replacement T3 Cradle Body #853-5829 is designed to fit 1" tubes on the Thule Ridgeline, Roadway, Revolver and SpareMe bike racks, but if your Harbor Freight bike rack has a 1"" tube arm this will also fit on that. If your tube is…

view full answer...

Answer 8

The Replacement SuperCush Cradle, #8880597, will not work with a Yakima DoubleDown, because the SuperCush works with 1-1/8" diameter rack arms. The DoubleDown uses replacements that are 1-1/4", such as #Y8890177. There are replacement…

view full answer...

Answer 9

Yakima Replacement SuperCush Anti-Sway Cradle and ZipStrips for Yakima Hanging-Style Bike Racks #8880598 and #8880597 have an inner diameter of 1-5/16 inches. If your current cradles have that same inner diameter then you will be able to simply swap…

view full answer...

Answer 10

I have a great solution for you. I confirmed with my contact at Yakima that the Replacement Cradle for Yakima HangOut or KingJoe Trunk Mounted Bike Rack - Qty 1 #Y8890153 will not fit your Yakima Kingpin 4. However, Yakima did confirm that the…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

What Size Diameter Tubes Does the Replacement Cradle Set Y8890177 Fit?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching