Parts Needed To Install Reese Above Bed Base Rails On a 2015 Ford F-250

Question

Question:

I currently have the Reese kit RP50087-58 installed on my Ford F150. I am upgrading to an F250 and will be removing the bed rails from the F150. Will the Reese bed rails that came with RP50087-58 work with bracket kit RP56016? If not, is there another frame bracket kit that will work or will I have to buy an entire new bracket and bed rail kit?

asked by: Scott B

0

Expert Reply:

In order to install the Reese Universal Base Rails for 5th Wheel Trailer Hitches part # RP58058 on a 2015 Ford F-250 you can use the Reese Quick-Install Custom Bracket Kit for 5th Wheel Trailer Hitches part # RP50026.

expert reply by: Conner L

0

Answer 1

We do not currently carry the WHRZT GPS system, but we do have a similar product available from Linxup. I recommend the Linxup GPS Tracking Device #300-AT3 or the device with 4G service #300-AT3-S. When using this product the Linxup GPS device…

view full answer...

Answer 2

I spoke to the representatives at Linxup for their GPS Tracking Device #300-AT3-S and #300-AT3, and they confirmed that they will work on both 12 volt and 24 volt systems.

view full answer...

Answer 3

The Rhinobox was definitely an unpopular choice for manufacturers to go with so swapping it out with the MORryde Cushioned 5th Wheel Pin Box for 18K to 21K Trailers w/ Lippert Rhino #MR55QR would definitely give you a major improvement in ride…

view full answer...

Answer 4

Currently the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box #GY98GR is the best option for replacing your Lippert Rhino Box Pin Box on your 2023 Grand Design Momentum 320G 5th wheel toy hauler. Reese does not make an Goosebox that is compatible with the…

view full answer...

Answer 5

We offer a a couple cushioned replacements for your Lippert Rhino pin box on your 2021 Cedar Creek 377BH. The correct replacement would depend on the type of dampening your need. The MorRyde #MR83QR is compatible with 14-18K 5th wheels and will…

view full answer...

Answer 6

The 4-bolt 5th wheel rails are not used as much any more. The 10 bolt style is preferred and more secure since you would be using 5 bolts per rail. If you can tell me the year, make, and model of the truck and the bed length I can make some…

view full answer...

Answer 7

The Reese Universal Base Rails, part #RP58058 and the Curt Base Rails, part #C16204 are both universal fifth wheel base rails, although not identical. They will work with Curt, Draw-Tite, Hidden Hitch, Reese, Valley and Husky fifth wheel hitches. But…

view full answer...

Answer 8

In order to carry the 3200-Watt Portable RV Inverter Generator w/ Cover #333-0003 on the back of your trailer with the 2" receiver you can use the 24x27 TorkLift Lock and Load Maximum Security Cargo Tray for 2" Hitches 500 lbs #TLA7752.…

view full answer...

Answer 9

The 24x27 TorkLift Lock and Load Maximum Security Cargo Tray #TLA7752 that you referenced is rated for the rougher ride quality that is present at the rear of travel trailers like yours which is a bit rougher like you noticed. I attached a picture of…

view full answer...

Answer 10

If you have a front hitch installed on your GMC 1500 truck you could use the Torklift Lock and Load part #TLA7752 which would work well to secure your generator. It will do a great job allowing you to transport the generators and will prevent theft…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...