C-Channel Portion Dimension of Demco 14793-95 A-Frame Coupler

Question

Question:

What size C-channel is used with this coupler?

asked by: Mark F

0

Expert Reply:

The Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2" Ball - Bolt On - 10K # DM14793-95 has a channel portion that is 3 by 3 inches on the inside and then connects to the 50 degree angle A-frame. I've attached a video to assist with other fit questions.

expert reply by: Jason S

0

Answer 1

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

view full answer...

Answer 2

The highest capacity 2 inch hitch ball we offer that has a 1-1/4 inch diameter shank is going to be the Curt #A-90 which has a 10k capacity. It is interesting that a 1 inch shank diameter ball #40038 has a 12k capacity yet has a smaller shank, but…

view full answer...

Answer 3

The Brophy 2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Stainless - 7.5K item #SC23-C you referenced is made in Clackamas, Oregon.

view full answer...

Answer 4

I am certainly glad you are taking safety into consideration when trying to choose your coupler, although none of the Demco couplers would be considered "safer" than the others you mentioned. Among the Demco Channel Tongue Trailer Coupler -…

view full answer...

Answer 5

The only differences between the Demco eZ-Latch Couplers #DM37ZR and #DM14793-81 is that the former has integrated loop holes for installing safety chains and a about a 2" drop while the latter doesn't come with provisions for attaching the…

view full answer...

Answer 6

You are correct. Other than how they are made, the Demco Cast Head Coupler w/ Jack Hole - eZ-Latch - 2" Ball - A-Frame - Bolt-On - 10K #DM37ZR and the #DM14793-81 have the same ratings and will work the same. There is no pro or con to either, so…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

C-Channel Portion Dimension of Demco 14793-95 A-Frame Coupler

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching