Rear View Safety Backup Camera and Monitor

Question

Question:

Hi there Could you please let me which monitor that kit needs Thank you

asked by: Arturo B

0

Expert Reply:

The Rear View Safety Backup Camera - Heated - Night Vision - RCA Connectors # RVS-812N is designed to go to any external monitor that has RCA connectors. We don't offer monitors alone that are compatible but we do have complete systems including monitors that I recommend instead.

- Rear View Safety Backup Camera System # RVS-770613-NM

- Rear View Safety Backup Camera System - Weatherproof Monitor - Quad View # RVS-7709900Q

I have added links to video reviews and manuals for you to check out as well.

expert reply by: Kyle S

0

Answer 1

With a backup camera system like the Rear View Safety #RVS-776614-213 placing one camera at the rear of the trailer and the other camera along the passenger side is a pretty common set-up. In combination with your driver's side mirrors this…

view full answer...

Answer 2

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

I recommend going with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL89DQ for hauling around an in-bed camper with your 2024 Ford F-350 Super Duty. I really like this kit because it has the higher 7,500 lb rating (which you don't…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...