What Trailer Wiring is Included With 391HYUNPALIS19T Stealth Hitch for a 2020 Hyundai Palisade

Question:

what is the wiring for? Does this include a trailer brake?

asked by: Dwayne M

Helpful Expert Reply:

The wiring included with the # 391HYUNPALIS19T Stealth Hitch for the 2019-2020 Hyundai Palisade includes the 7-way trailer connector, but not a trailer brake controller.

For a brake controller, I'd recommend a proportional controller like the Tekonsha Primus # TK90160. You'd also need a brake controller wiring kit like # 5506. The 7-way from the hitch would include a wire for the brake output that would need to be extended under the vehicle to the engine compartment and through the firewall where it'd connect to the blue wire exiting the brake controller. The black and white wire from the controller would run to the battery, with the black positive wire running through the 30 amp breaker included in the kit. The red controller wire connects to the cold side of the brake lamp switch locate atop the brake pedal. Use a circuit tester like # 40376 on the wires exiting the switch. Once the find the wire that only shows voltage when the brake pedal is pressed, tap the red brake controller wire into it.

I've linked you to a help aritcle that explains further about how to install a brake controller.

expert reply by: Mike L