Will the Road Armor Shock Absorbing Equalizer Kit Fit a Grand Design Transcend Xplor

Question

Question:

Will this work on my Grand Design Transcend Xplor 260RB trailer? It has 3500# Dexter Axles 33inch apart.

asked by: Brian G

0

Expert Reply:

The Road Armor Shock Absorbing Equalizer Kit part # LC696740 is designed for a 35" axle spread so it won't work well for you but we do have a set of cushioned equalizers that will, the Dexter E-Z Flex Suspension Kit - Double-Eye Springs part # K71-652-00 which I actually prefer as it's a complete kit.

I have attached a sample install video I did myself below.

expert reply by: Conner L

0

Answer 1

The Road Armor Shock Absorbing Equalizer Kit #LC696740 that you referenced is close enough dimensionally to the Equa-Flex equalizer #LC279687 that you have now so it will fit and work well. Bushing come with this already pre installed, for bolts…

view full answer...

Answer 2

I would be happy to compare the Road Armor, Dexter E-Z Flex, and MORryde equalizers you were looking at for your Jayco Eagle 325BHS. First things first each of these kits are designed to replace equalizers that measures roughly 6" between the…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The correct tie-downs for your 2019 Ram 3500 Tradesman short bed depend on your hitch. You can choose from the following: With a factory installed hitch or non-Torklift aftermarket hitch -TorkLift Talon Camper Tie-Downs #TL52XR (front) and #TL34FR…

view full answer...

Answer 5

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 6

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 7

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

Answer 8

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 9

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

view full answer...

Answer 10

Roadmaster's fitguide lists that the Roadmaster Rear Anti-Sway Bar #RM73FR will fit your 2019 Ram 3500 4WD with factory air suspension.

view full answer...

Answer 11

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Will the Road Armor Shock Absorbing Equalizer Kit Fit a Grand Design Transcend Xplor

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching