Are Welded or Bolt On Ball Mounts More Reliable than Other

Question

Question:

Which is the most reliable Welded trailer ball or bolt on trailer ball?

asked by: George K

0

Expert Reply:

I wouldn't say one type of ball mount has more or a reputation of failing than the other. The welded on triple ball mount part # BWBMTT31004 that you referenced is very well made and would not have any issues with reliability.

expert reply by: Jameson C

0

Answer 1

Unfortunately, we don't offer a kit like the #e99039-9 for a 2-1/2 inch class V receiver. This being said, you can get the same coupler lock, part #e98884, coupler lock #e98881 for a 2-1/2 inch hitch and the #e98900 storage bag separately.…

view full answer...

Answer 2

The Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K #2753 is not the correct fit for zero rise or drop. For the zero rise or drop you will need the Curt Solid 2-Ball Mount for…

view full answer...

Answer 3

The difference is the color of the pin and clips of the two kits. The Patriot Adjustable Hitch Adapter part #PH67SR has black pin and clips whereas the #PH54FR has red ones.

view full answer...

Answer 4

Yes. You can use a drop ball mount like the #C45336 with the Patriot Hitches #PH54FR to get to your 16" drop total. 5" drop ball mounts are very uncommon, so a 6" like mentioned above and raising the receiver in the Patriot…

view full answer...

Answer 5

We don't have a combo of the Curt Hitch Ball #C40008 and Curt Ball Mount #C45340. The ball mount is extremely heavy-duty, rated up to 17,000 pounds. I think it's safe to assume you don't have a torque wrench rated up to 450 foot pounds…

view full answer...

Answer 6

It sounds like you are having trouble with the signals and getting power to your trailer connector on your 2003 GMC Yukon XL. The type of trailer socket that carries reverse light signals is the 7-way type, like #37185, which is included in our 7-way…

view full answer...

Answer 7

I can certainly help you with that. Since the Curt T-Connector Vehicle Wiring Harness, part #C55384 is a 4-way connector the four functions will be Yellow for the left turn and brake, Green is for right turn and brake, Brown is for running lights,…

view full answer...

Answer 8

In my opinion you are going in the right direction with a frame mounted receiver. The only advantage to a weld on application is that, if welded properly, the attachment point, weld, will be stronger than the hitch or trailer frame steel and one of…

view full answer...

Answer 9

If I am following you correctly, I think what you are looking for is a drop hitch that has a 2.5" shank for your truck and then the part that drops is a 2" receiver. So essentially a hitch reducer that also supplies a drop. If that is…

view full answer...

Answer 10

I would be happy to recommend a weight distribution system for your 2020 Toyota Tacoma towing a travel trailer with a GVWR of 4700lbs but you will need to confirm you total tongue weight before purchasing a system. Total tongue weight is the tongue…

view full answer...

Answer 11

I have another option for you, but while the Patriot Hitches Adjustable Drop Hitch Receiver Adapter #PH54FR would allow you to install your current ball mount with provisions for two friction sway control, it has not be tested for this at this time…

view full answer...

Answer 12

There isn't a specific distance you want to have between the bumper of a vehicle and the hitch ball, but in general you'll want more than an inch. This will give you additional leeway when hitching up the trailer so that you don't slam…

view full answer...

Are Welded or Bolt On Ball Mounts More Reliable than Other

Product Page this Question was Asked From

Continue Researching