bing tracking image
Q & A Icon

Why Disconnect Battery to Flat Tow Vehicle Behind Motorhome  

Question:

2019 Chevy Spark manual transmission. Why do I need to unplug - battery cable when towing behind RV?

0

Expert Reply:

GM states in the owner's manual that to recreationally tow the vehicle, the negative battery cable must be disconnected. The owner's manual doesn't list a specific reason, it only states that failure to do so could damage the vehicle. The fact that the key needs to be left in the Accessory position while towing so the steering wheel doesn't lock up gives me a pretty good idea that with the key in the ACC position, there must still be an electrical draw on the battery. Disconnecting the battery prevents the battery from going dead while the vehicle's being flat towed.

Roadmaster offers a disconnect with switch, part # RM-766 that lets you easily disable the battery ground circuit without physically needing to disconnect it. It'll also keep the battery charged as you're rolling down the road.

If order to flat tow your Spark, you'll need base plates like # RM-523197-5 for an LS model or # RM-523202-5 for an LT model , a tow bar like the Roadmaster Falcon All Terrain # RM-522, safety cables # RM-643, a wiring solution # RM26FR, a supplemental braking system like # RM-8700 and a # RM-751480 stop light switch kit and possibly a high/low adapter. When installed, the base plates will sit approximately 14 inches above the ground. If your hitch receiver height on the motorhome has more than a 3 inch plus or minus height difference you'll need a high/low adapter to bring it within that range. I'll link you to our adapter selection.

expert reply by:
0
Mike L

Products Referenced in This Question








Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>