Could Lippert Jack-It LC429756 Fit 2020 Forest River No Boundaries

Question

Question:

Will a Jack it 2 bike rack mount fit over my 2020 Forest river No Boundaries 19.6 electric hitch system? I put it in the vehicle indicator on the website and cant tell by what it told me. Thanks.

asked by: Larry D

0

Expert Reply:

As long as the height of your trailer jack is less than 22-1/2 inches the Lippert Jack-It bike rack part # LC429756 would fit above it and work great. I attached a review video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

For carrying bikes with your Tag Trailer the easiest solution will be a Lippert Jack It bike rack #LC429756 which attaches to the jack mounting flange of your trailer and gives you a way to carry a bike rack up above the propane tank area. This is…

view full answer...

Answer 2

The Jack-It 2 Bike Rack for A-Frame Trailers part #LC429756 has an offset adapter that will position the bikes further away from the tongue of the trailer and closer to the body to ensure there are not any turning clearance issues. This will then be…

view full answer...

Answer 3

The 80 lb weight capacity of the Jack-It 2 Bike Rack for A-Frame Trailers #LC429756 is the total weight capacity for the rack. I have added a link to a video review of the Jack-It for you to check out as well.

view full answer...

Answer 4

I attached a picture that shows the correct way to install the Lippert Jack-it bike rack part #LC429756 that you referenced. We do not recommend installing it in any different way if you are towing with it. There is a way to use it in a trailer hitch…

view full answer...

Answer 5

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, if you plan on bolting the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR on then you would need to drill holes in the adjustable arms in order to set them to the correct length. There aren't any predrilled so that this one…

view full answer...

Answer 8

I looked up pictures of your NuCamp 320 and didn't see a back bumper on it for a bike rack or hitch to attach to so that would not seem like a promising place to mount a bike rack. I know you mentioned not wanting to mount a bike rack up front…

view full answer...

Answer 9

Thanks for the pictures! 2" hitches do not all have a 5,000 lbs capacity. The capacity varies by vehicle. That is an old Reese 06497 hitch and the sticker is correct. It does indeed top out at 3,500 lbs. It looks like this hitch came on all of…

view full answer...

Answer 10

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 11

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

view full answer...

Answer 12

Hi Tad, Based on the dimensions you provided I recommend going with the Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide #C13702. This would mount under the frame with the receiver tube sitting roughly 2" below the…

view full answer...

Could Lippert Jack-It LC429756 Fit 2020 Forest River No Boundaries

Featured Help Information

Miscellaneous Media

Continue Researching