Parts Needed To Install Disc Brakes On a 2010 Sea Doo Challenger 180 Trailer
Question:
Hello, Im looking for a marine disc brake setup for my 2010 Seadoo Challenger 180 single axle boat trailer. Boat weights 2000 pounds. I dont have any brakes on the trailer at this time, but it does have the 4 bolt mounting plate for brakes. Can you recommend a complete package for disc, actuators, lines.... It is being pulled by an F-150 with onboard trailer brake controller. Thanks!
asked by: Jeremy C
Expert Reply:
In order to choose the correct disc brakes for a 2010 Sea Doo Challenger 180 Trailer you'll need to know the axle capacity. If you have a 2,000-2,200 lb axle you can use the Kodiak Disc Brake Kit part # K2HR2D but if you have a 3,500 lb axle then you can use the Kodiak Disc Brake Kit part # K2HR35D.
In order to complete your setup you'll need the HydraStar Marine Electric Over Hydraulic Actuator Kit part # HS381-9067 and Kodiak Hydraulic Brake Line Kit part # 18SI-BLKIT.
Products Referenced in This Question
Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 18 Feet Long
- Brake Lines
- Flexible Brake Hose
- Brake Line Kits
- Single Axle
- Kodiak
more information >
Hydrastar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Hydrastar
more information >
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 2,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 2000 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Parts to Convert Tandem Axle Boat Trailer From Hydraulic Disc Brakes to Electric Over Hydraulic
- Shop: Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16" Ball - 3" Channel - Bolt On - 21K
- Shop: Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Shop: Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Shop: Tekonsha Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Top Load
- Shop: Hydrastar Electric Over Hydraulic Actuator Adapter Module for Ford and Chevy Brake Controllers
- Shop: Replacement Trailer Hub Bearing - 02475
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Q&A: Correct HydraStar Kit to Convert From Surge Brakes to Electric Over Hydraulic
- Q&A: 2020 GMC Sierra 1500 Factory Brake Controller Compatibility With Hydrastar EOH Brake Actuator
- Q&A: What Are The Differences Between The HydraStar # HS381-9067 and HS481-8067?
- Q&A: Is a Hydrastar Electric Over Hydraulic Actuator Adapter Module Needed on a 2021 GMC Sierra 3500HD
- Q&A: Does the HydraStar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes # HS481-8067
- Q&A: Recommended Electric Over Hydraulic Conversion Kit for a Tandem Axle Boat Trailer w/ Disc Brakes
- Search Results: hydrastar
- Video: HydraStar Marine Electric Over Hydraulic Actuator Installation
- Video: Review of Hydrastar Brake Actuator - Electric-Hydraulic Brake Actuator - HS481-8067
- Search Results: 7 pole junction box
- Search Results: 7 way harness
- Video: Hydrastar Brake Actuator - Electric-Hydraulic Brake Actuator - HS381-8067 Review
- Video: Hydrastar Brake Actuator - Electric-Hydraulic Brake Actuator - HS381-9067 Review
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: 25580
- Video: etrailer Electric Trailer Brake Kit Installation
- Search Results: junction box
- Shop: Trailer Wiring
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Shop: Brake Controller
on Accessories and Parts
