What is PHEV Model of 2018 Mitsubishi Outlander for Picking Out Hitch

Question

Question:

I have an outlander can you tell me what is a phev model

asked by: Vincent G

0

Expert Reply:

The PHEV models of the 2018 Mitsubishi Outlander are hybrid models. Most likely if you are unsure if you have one or not you would not. If you were looking for a trailer hitch you would want the part # C13163 if you do not have a PHEV or if you did have one # C13398.

expert reply by: Jameson C

0

Answer 1

We have the Curt hitch part #C13163 that fits your 2019 Mitsubishi Outlander non-PHEV but the #C13398 only fits the PHEV models.

view full answer...

Answer 2

We have a Curt hitch that fits your 2019 Mitsubishi Outlander SE with the part #C13398 but the part number you referenced only fits the Outlander Sport models.

view full answer...

Answer 3

The correct Curt Trailer Hitch Receiver for a 2016 Mitsubishi Outlander is part #C13163 or part #C13079 if you have a sport model. The rear bumper fascia and exhaust are different on the sport models which is why there is a different trailer hitch…

view full answer...

Answer 4

I have a way you can carry a bike rack with your 2019 Mitsubishi Outlander PHEV but there aren't any hitches that fit the PHEV models like what you have. So instead your best option is a trunk mounted bike rack like the Yakima Fullback 2 bike…

view full answer...

Answer 5

I have a solution for you, but the Curt #C13079 is only a confirmed fit on the Mitsubishi Outlander Sport models. Instead, you'll want to use the Curt #C13163, which is confirmed for the Outlander (non-Sport and non- Plug-in Hybrid vehicles).…

view full answer...

Answer 6

For your 2018 Mitsubishi Outlander we have the Curt Class III hitch part #C13398 as a confirmed fit. This is a 2 inch hitch with plenty of towing capacity. Then for trailer wiring I recommend the Tekonsha kit part #118482 because the converter box…

view full answer...

Answer 7

As long as your Outlander isn't the plug in hybrid (PHEV), I'd recommend the #118482 for vehicles without the factory tow package or #118277 for vehicles with the tow package. If your vehicle has the tow package, it will have the tow package…

view full answer...

Answer 8

The only part of the Curt Trailer Hitch Receiver part #C13398 that will be visible once installed on your 2018 Mitsubishi Outlander PHEV will be the receiver tube opening. Therefore, the majority of the hitch will actually be hidden. I do have an…

view full answer...

Answer 9

Due to vehicle manufacturers having a loose tolerance for mounting the hangers that suspend the exhaust system, occasionally people will run into this issue when installing a hitch. Because of this, we have come up with a help article that lists a…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...