bing tracking image
Q & A Icon

Recommended Cover for Ultimate Trailers Motorcycle Trailer  

Question:

I am wondering if you can advise on the ADCO Cover part number 290-46001. I have a custom motorcycle trailer that is a tear shape, the deck size is 96inch wide by 132inch long, and the height is not a concern as the trailer is on airbags so the whole deck lowers by approx 8. With the shape of the trailer my fear is that the 12foot cover will have a lot of extra to tie. My main question is with the 10foot cover is the foot print have any wiggle room that it may fit my trailer? The trailer is made by Ultimate Trailers, I have attached a photo as well so that you can see the basic shape.

0

Expert Reply:

If the deck (or trailer body) size of your Ultimate Trailers motorcycle trailer is 132" (11') long then you'll want to go with the 12" Adco SFS AquaShed # 290-46002 over the 10' option # 290-46001. Since there are a variety of trailer styles out there fitment basically boils down to the length so you have to make sure your trailer isn't longer than the cover like it would be if you went with the 10' cover.

With your trailer having that contoured top there will likely be some more slack than if this was used for an 11' horse trailer, but you can use the cinch ropes to help tighten things down and lessen any billowing that might occur from the wind.

expert reply by:
0
Jon G
click to enlarge

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>