Steering Stabilizer for 2006 Winnebago Sightseer Class A Motorhome with F53 Chassis and V10 Engine

Question

Question:

I am looking for a steering stabilizer for a Winnebago Sightseer motor home. 29, 18,000 gvw, Ford V10, I beam front axle.

asked by: Carl

1

Helpful Expert Reply:

For your 2006 Winnebago Sightseer Class A Motorhome built on the Ford F53 Chassis, the correct Roadmaster Steering Stabilizer is part # RM-RBK22-RSSA.

This includes the Roadmaster Reflex Steering Stabilizer as well as the required mounting kit to install it on the I-beam front axle of your Sightseer with the V10 engine.

expert reply by: Carla M

1

Answer 1

The Roadmaster Reflex Steering Stabilizer with Mounting Brackets part #RM-RBK22-RSSA is a confirmed fit for your 2003 Winnebago Sightseer. This will fit the 16,000 lb. through 24,000 lb GVWR's which cover the line of the Sightseers. This…

view full answer...

Answer 2

Based on my research your 2005 Winnebago Adventurer 33V RV is built on the Workhorse W22 chassis. I do still recommend verifying this. If you are looking to upgrade/enhance the suspension because of instability and sway the best initial component…

view full answer...

Answer 3

Yes, the front #TFFF53B Timbren suspension enhancement are similar to the front #SSF-170-40-2 SumoSprings for your 2018 Thor ACE 30.2 Motorhome. Timbren is a little more well-known but we have received feedback from our customers that the…

view full answer...

Answer 4

Since you have a 2021 Winnebago Adventurer your chassis will actually be a 2020 since the chassis' are always made a year prior for the motorhome. From there you'll need to know if you have a V8 or V10 engine. If you have a V8 engine…

view full answer...

Answer 5

The 2020 Fleetwood Bounder 35K is on a Ford F-53 Chassis and the correct stabilizer is the Roadmaster Exact Center Steering Stabilizer #RM42RR. You made a nice choice as the stabilizer will provide dramatic improvements to the motorhome's…

view full answer...

Answer 6

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 7

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 9

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 10

We do - for your 2023 Ford F-350 you'll want the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TL89CR.

view full answer...

Answer 11

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 12

Hi there David; we do have truck camper jacks that can work for your F-250 with a lift and large tires. What you can use are camper jacks from Brophy, which have a 17" to 67" lift range, which is the highest possible lift height. There are…

view full answer...