Fit of Phoenix Faucets PF231321 Hybrid RV Kitchen Faucet on Roadtrek Class B Motorhome

Question

Question:

will the Phoenix Faucets Hybrid RV Kitchen Faucet - Single Lever Handle - Chrome Item # PF231321 work in a 2006 Roadtrek 190 Popular. Would you recommend something different? thank you

asked by: William M

1

Helpful Expert Reply:

The Phoenix Faucets # PF231321 would be a good choice regardless of if you're replacing a 1 or a 3 hole mount faucet. Escutcheons are included for both mounting options. I'll work great in your Roadtrek Class B motorhome.

If you click the provided link, you can see a product description video that you might find helpful.

expert reply by: Mike L

1

Answer 1

the Phoenix Faucets 8 Inch Single Handle RV Kitchen Faucet, #PF231321, might be the best option for your trailer's sink. This faucet is designed to be installed in either a one or three hole sink mount. The Ultra Fab Faucet, #277-000182, that you…

view full answer...

Answer 2

Thanks for the picture of your Phoenix Faucets Hybrid RV Kitchen Faucets #PF231321. It could be a couple of reasons your faucet is leaking, however the most common reasons faucets leak is due to an o-ring not being installed correctly or your water…

view full answer...

Answer 3

I went out to the warehouse to measure the line length on the Phoenix Faucets 8" Single Handle RV Kitchen Faucet #PF231321. Measuring from the end of the threaded shaft the lines are 9-1/2 inches long. Measured from the base of the faucet they…

view full answer...

Answer 4

I typically just use a razor knife, like #PT92ZR, to cut out small chunks of caulk at a time until I can get the line free. Just be careful that you don't cut into the line if it's pex or some other soft tubing. The Phoenix Faucets Hybrid RV…

view full answer...

Answer 5

Yes, the spout on the Phoenix Faucets 8" Single Handle RV Kitchen Faucet part #PF231321 does indeed swivel for use with double bowl sinks. The aerator on the end can be removed to flush the lines so I don't see any reason why you could not…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 9

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...