Replacement Hub/Drum and Bearings for a Boat Trailer 7K-8K Axle

Question

Question:

I need a trailer repair kit. At least two bearings with all the hardware and possibly a drum. Its a 7-8000lbs axle - boat trailer, drum 13 diameter 8 bolts. For the measurements please send me an email and Ill forward pictures. Thanks

asked by: David M

0

Expert Reply:

Based off of the info you gave me the Trailer Hub and Drum # AKHD-865-7-G-EZ-K should be what you're after with the Inner Bearing # 25580 and Outer Bearing # 14125A. This comes with both of those bearings plus the races, and the Grease Seal # GS-2250DL which has a 2.25" ID.

For a bearing kit with these exact pieces you need # BK3-200 but if you're grease seal is 2.125" ID then you need # BK3-210 which uses the same bearings as well as the grease seal # GS-2125DL.

If you find that you have something different or you just want to be sure you can definitely replay back to me with pictures of your trailer and I can help you out.

expert reply by: Jon G

0

Answer 1

I was unable to find a reference for that part number, though there is a way to find the correct hub for you. Start by removing your current your hub and looking at the bearings themselves; wipe away the grease and you should be able to see the…

view full answer...

Answer 2

I don't know what axle your trailer has so it's hard to say. But if you know your trailer has a 5,2000 to 7,000 lb axle with an 8 lug bolt pattern this #AKHD-865-7-G-EZ-K would be a great option. It's galvanized as well which…

view full answer...

Answer 3

At this time we do not, but what I can tell you is that the bolts in the Mounting Bolts and Hardware for 12" Brake Assemblies #BRKH12 are just regular grade 5, 3/8"-24 x 1-1/4" bolts that you should be able to source locally from any…

view full answer...

Answer 4

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 5

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 6

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 7

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 8

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 9

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 10

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Replacement Hub/Drum and Bearings for a Boat Trailer 7K-8K Axle

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching