How Much Does the Bulldog Winch Mount for Jeep JL with OE Front Bumper BDW20353 Weigh

Question

Question:

Bulldog Winch Mount for Jeep JL with OE Front Bumper Item # BDW20353 What is the weight of this product? Thank you.

asked by: Steve K

0

Expert Reply:

The Bulldog Winch Mount for Jeep JL with OE Front Bumper part # BDW20353 weighs around 20 lbs.

expert reply by: Conner L

0

Answer 1

The thickness of the steel used on the Bulldog Winch Mount #BDW20353 is 5 mm which is close to 3/16 of an inch and also basically 6 gauge.

view full answer...

Answer 2

The etrailer Invisible Base Plate Kit, #e98948 is for 2021 Jeep Wrangler Unlimited model equipped with a factory plastic bumper. For your 2021 Jeep Wrangler Rubicon with the factory steel bumper, you will want the Demco Tabless Base Plate Kit,…

view full answer...

Answer 3

The Blue Ox Avail Non-Binding Tow Bar #BX7420 and etrailer XHD Non-Binding Tow Bar #e67ZR are fairly similar but have a few key differences. The first difference being the weight capacity, the #e67ZR has an extra 500lbs of capacity over the #BX7420.…

view full answer...

Answer 4

Yes, the Bulldog Winch Mount for Jeep JL with OE Front Bumper part #BDW20353 will work on a 2020 Jeep Gladiator JT. If you don't already have a winch picked out, the Bulldog Winch Trailer Winch part #BDW15019 is an excellent option but I have…

view full answer...

Answer 5

The Bulldog Winch Mounting Plate #BDW20208 you reference will not fit your 2022 Jeep Gladiator Rubicon. The Bulldog Winch Mounting Plate #BDW20208 is only compatible with select Jeep JK and JK Unlimited models from 2013-2016. Instead, you'll want…

view full answer...

Answer 6

The TruXedo Elevate #TX24NV is a 'CS' rack and the #TX84NV is an 'FS' rack. CS stands for compact size and FS stands for full size. If you had a Ford Maverick/Ranger, or Chevy/GM Colorado/Canyon then you would want a CS rack. For a…

view full answer...

Answer 7

The Bulldog Winch Winch Mount #BDW20208 is a confirmed fit for your 2017 Jeep Wrangler Unlimited Rubicon Recon Edition with the OE Bumper. I have attached a picture of the installation instructions for you to check out. There is a little bit of…

view full answer...

Answer 8

Welcome back! Yes, you will want to lubricate the Tab Assemblies item #BLU57XR. Make sure you're using a silicone based lubricant like the Roadmaster LubeMaster Dry Silicone Spray item #RM-747 and not a petroleum based one like WD40.

view full answer...

Answer 9

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 10

To install the Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400 on your 2022 Jeep Wrangler Limited Sport, you will start by: 1. Start by confirming that you have the right wire, you 'll want to confirm this by using a multimeter like…

view full answer...

Answer 11

For your 2021 Jeep Wrangler, you actually can not splice into the brake wire. For this reason, you will want to use the Roadmaster Stop Light Switch Kit #RM-751490 instead. This kit will connect to an inline fuse to your vehicles positive terminal on…

view full answer...

Answer 12

I get your line of thinking but there's a much simpler solution to your issue. The brake light relay #RM-88400 and stop light switch kit #RM-751471 can not be used together. Since you're having brake light indicator issues you will only want…

view full answer...

How Much Does the Bulldog Winch Mount for Jeep JL with OE Front Bumper BDW20353 Weigh

Product Page this Question was Asked From

Continue Researching