Replacement Fender for 2005 Lowe Boat Trailer

Question

Question:

Have a 2005 Lowe boat and trailer. the passenger side of the trailer had the fender torn off not happy. Do you have replacements for that. It had a step platform also on the fender and was/is made of plastic.

asked by: Don H

0

Expert Reply:

I was able to find some photos online for a 2005 Lowe Boat Trailer and it looks to use the Fulton Single Axle Trailer Fenders with Top and Side Steps like part # F008593. I am not sure which exact size or color you need but I have attached a full list of options below you just need to know the wheel diameter and color.

expert reply by: Conner L

0

Answer 1

I've contacted Brightway, who forwarded me a copy of the instructions they include with the #BRW77FR switch mode charger. I've provided a clip showing the instructions for you.

view full answer...

Answer 2

The first thing to check is that the power source you have the Bright Way Switch Mode Battery Charger #BRW77FR is actually producing power. If you have power you should see at least the "Power On" light lit up on the charger. You…

view full answer...

Answer 3

The mounting brackets you can use for the Fulton Single Axle Trailer Fender with Top and Side Steps - Silver Plastic - 13" Wheels #F008593 are the Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF11X35W (Pair)…

view full answer...

Answer 4

We do have a selection of fenders for 13" wheels that you can use to replace your current fenders. Among our linked selection we have different constructions like aluminum, plastic, and steel. These fenders can mount via brackets or welding…

view full answer...

Answer 5

I was able to go out to the warehouse and measure the mounting brackets holes for the PF11X35W and found that it was 5-5/16 inches or 5.3125 inches. If these aren't an exact match, new holes can usually be drilled into the brackets to make them…

view full answer...

Answer 6

I'd recommend using Redline bolt-on fender brackets, part #PF1135-BKT-2. The brackets will mount as shown in the provided photo using U-bolts that are sold separately. The U-bolts needed will depend on the height and width of your trailer frame.…

view full answer...

Answer 7

In height or total diameter, a 185/80-13 and 175/80-13 like part #AM1ST77 only differ by about 5/8 of an inch. The 185 would have a diameter of 24.65 inches while the 175 would have a diameter of 24.02 inches. The section width, or thickness of the…

view full answer...

Answer 8

The way to know if the Aluminum Hi-Spec Series S5 Trailer Wheel - 13" x 5" Rim - 5 on 4-1/2 - Silver #AM22323HWT will fit on your hub that uses wheel bolts instead of nuts is to measure the pilot diameter or center hole of your current…

view full answer...

Answer 9

When it comes to installing The CE Smith Single Axle Trailer Fenders #CE19502-2 you will need both The CE Smith Galvanized Steel Step #CE26212G and The CE Smith U-Bolt - Galvanized #CE15284GA. The bracket has a galvanized steel that helps resist rust…

view full answer...

Answer 10

I have provided a link of the fenders that will work with your existing trailer and a 13 inch tire size. Several of these fenders provide areas that are intended to mount lights but none have lights that are included with the fenders. For your…

view full answer...

Answer 11

In order to help you get the correct replacement parts for your boat trailer I'll need to know a little bit more info. We do have some axles with a 72" hub-face measurement, like part #20545I-EZ-72-15, which should be what you're…

view full answer...

Answer 12

We don't have any way of knowing what the OEM parts are on a Karavan trailer, but since you have 14 inch wheels, the CE Smith fenders you asked about will work: - CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic -…

view full answer...

Replacement Fender for 2005 Lowe Boat Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching