Landing Gear Pad Recommendation for 2019 Forest River Columbus

Question

Question:

I have a 2019 Forest River, Columbus, 38 ft. fifth wheel camper. It has six landing gear pads. The dia. of pad is about 9 inches. Will your pads fit on these, and what is the cost for six?

asked by: Ronald R

0

Expert Reply:

We have a perfect solution for you! The SnapPad kit part # SP54FR6 is for 9 inch diameter feet pads and comes as a kit of 6 like what you are wanting so it's a perfect solution.

expert reply by: Jameson C

0

click to enlarge

Answer 1

That's a good question and the difference between the two SnapPad Jack Stand Pads for Motorhome are different shapes and depths, it isn't solely the notch in the center. I added photos of the two pads side-by-side so you can see the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

I am sorry but we do not have an AC cover with those dimensions. The closest option we have is the Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners item #AT3308046006 which measures 40-1/2" long x 29" wide x…

view full answer...

Answer 4

Hey Brad, thanks a bunch for going ahead and getting all those measurements in advance. Based on the measurements you've given, the TorkLift GlowStep Revolution Uprising Steps w/ Booster Step #TL52SR will work perfect for your coach. These steps…

view full answer...

Answer 5

If you have the Gooseneck versions of the Curt CrossWing ( #C92DR or #C32DR) you unfortunately would not be able to use the Rota-Flex with it. The pivoting head causing too much strain for the single point of contact you have with a gooseneck hitch.…

view full answer...

Answer 6

The SnapPad Prime Jack Pads #SP84FR4 are specifically designed to fit the Power Gear Leveling Systems w/ 10" Round Concave Jack Feet on your 2014 Fleetwood Bounder 34B. The Pads #SC99MR Stromberg told you to use will not fit on your Bounder as…

view full answer...

Answer 7

Demco actually has a kit that was designed to convert an Air Force One kit to a Stay in Play DUO which is what you would need since you have hydraulic brakes with the part #SM99231. This will work with what you have now and work great. If you send me…

view full answer...

Answer 8

The correct SnapPad kit for your Replacement Foot Plate #LC359344 is the SnapPad Prime Jack Pads #SP84FR4. If you need just a single SnapPad then you're looking for part #SP84FR instead.

view full answer...

Answer 9

We have exactly what you're needing, Rex! For your 9.9" diameter HWH jack feet you need the SnapPad HiWay 10 Jack Pads for HWH and Atwood Leveling Systems w/ 10" Round Jack Feet #SN58FR.

view full answer...

Answer 10

The 101000156 part number you reference has to do with a motor which fits a variety of systems. In order to determine which replacement leg you're going to need for your landing gear, I am going to need to know what specific system you have. For…

view full answer...

Answer 11

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Landing Gear Pad Recommendation for 2019 Forest River Columbus

Product Page this Question was Asked From

Continue Researching