Do I Need to Modify the Trailer Height After Getting 2" Lift On Truck To Tow Level
Question:
I’ve installed a 2” LP Aventure lift on my 2017 2.5L OB and tow a Harbor Freight heavy duty folding trailer. Do I need to make any upgrades to the trailer to adjust for the 2” lift on the vehicle?
asked by: Paul
Expert Reply:
For a 2" lift on the 2017 Outback Wagon you should not need to do any adjustments to the trailer to tow level because 2" is minimal. You may need to switch out ball mount to a ball mount with more of a drop if your hitch height has increased. I recommend to measure from the top of the hitch receiver to the ground. Then measure from the bottom of the trailer coupler to the ground. The difference in those two measurements is how much drop you need to tow level. We recommend to be within 2" of level to tow the trailer safely. I recommend to use an adjustable ball mount like part # C45900 that gives you up to 6" of drop with either a 2" or 2-5/16" ball. This should provide enough drop for you, if not I have attached a link of our ball mounts.
Products Referenced in This Question
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 14000 lbs GTW
- Class IV
- CURT
more information >
Product Page this Question was Asked From
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 14000 lbs GTW
- Class IV
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Embrace Winter Wanderlust: Celebrate Holidays with Harvest Hosts
- Article: Determining Trailer Tongue Weight
- Article: Which Hitches are Made in the USA
- Q&A: Will Rock Tamer Mudflap Fit With Curt Adjustable Ball Mount # C45900
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Gooseneck Hitch For A 2022 RAM 3500 Cab And Chassis With Flat Bed
- Q&A: How Large is the Buyers 3375613500 Fabricator Hitch?
- Q&A: Will the 2-Tang Clevis for BulletProof Hitches Adjustable Ball Mount Work w/ BulletProof Hitches?
- Q&A: Recommended Adjustable Ball Mount for a 2008 Chevy 2500HD
- Q&A: Do You Carry The Patriot Hitches Adjustable Receiver In a 10,000LB Capacity?
- Q&A: Locking Pin and Anti-Rattle Recommendation for Curt Deep Drop Adjustable 2-Ball Mount for 2" Hitches