Replacement Center Cap for my 5 Spoke Aluminum Rim

Question

Question:

Looking for qty 2-4 chrome wheel center caps for a 2006 Starcraft Antiqua trailer and a 5 spoke 14 wheel. Looks identical to this, but mine is a 5 spoke, https://www.etrailer.com/Accessories-and-Parts/Americana/AM54FR.html Thanks!

asked by: Mitch

1

Helpful Expert Reply:

The Replacement Center Cap for 13" and 14" Aluminum Hi-Spec Series 06 Wheels part # AM54FR is one of several types of center caps we have but I do not see one similar to the one you mentioned in a 5 spoke.

I have linked all of the options available for you to check out but the wheel manufacturer may be the best place for an exact replacement.

expert reply by: Randy B

1

Answer 1

For your 14 inch diameter Hi Spec Series 6 wheel that you sent in a picture of the correct wheel center cap is the part #AM90098.

view full answer...

Answer 2

We do have an option for you; the Americana Trailer Wheel Center Cap #AM90175 which will fit on 14" diameter wheels with a 5 bolt pattern. I recommend you measure the wheels pilot diameter and verify that it matches the pilot diameter of these…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Replacement Center Cap for my 5 Spoke Aluminum Rim

Featured Help Information

Miscellaneous Media

Continue Researching