Can Furrion Chill RV AC Unit Replace Quick Cool by Dometic

Question

Question:

Will the Fuirrion Chill 1550 replace my ducted Quick cool AC? 2004 GulfStream

asked by: Elmo W

0

Expert Reply:

Your Quick Cool AC unit was made by Dometic so to replace it with a Furrion you'd want to go with the Furrion Chill # FR42PV which is for ducted applications and can be used to replace Dometic units. You will need a new thermostat with the part # FR33PR and you'd be set.

expert reply by: Jameson C

0

Bob R.

6/26/2020

Is this something I could install myself? And yes it does sound good

Reply

Chris R.

6/30/2020

The Furrion AC unit could certainly be installed by yourself if your mechanically inclined. If you don't have any experience though it might be best to have a certified technician handle the wiring, etc.

Reply

Answer 1

The Replacement Glass Top for Furrion 2-in-1 Range Oven part #C-FSRE21SA-SS-003 is what you need to replace the glass top on a Furrion 2-in-1 Range Oven (FS17WB4A-BL) which is the same as our Furrion 2-in-1 Range Oven part #FSRE17SABL that is now…

view full answer...

Answer 2

There is a diagram of the wiring for the Furrion #FR58PR in the instructions, but I've gone ahead and linked a photo of the wiring diagram as well as the instructions for this unit.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

The replacement glass cover for your Furrion 2-in-1 Range Oven is part #C-FSRE21SA-SS-003. This is compatible with the 17" ovens #FSRE17SABL and #FSRE17SASS as well as the 21" oven #FSRE21SABL.

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...