Towing Components for 2011 Chevy Corvette Grand Sport
Question:
would like to order a trailer hitch for 2011 Corvette Grand Sport. Does the mounting hardware nuts/bolts/washers come with the hitch or do I order separately? Just need simple wiring that goes from vehicle to trailer. I have a 4 round hook up not. Can send picture via cell phone. Dont know how to describe it otherwise. In the hitch description for C11380 it says something about excluding dual exhaust. I have a dual exhaust. Id feel better if someone called as Id like to get this ordered today. Thanks
asked by: Jessica M
Expert Reply:
The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11380 does come with the mounting hardware needed for installation. This will not fit the dual mode exhaust but will fit all other models. The dual mode is the center not the outside. This will use the Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs # C45521 with hitch pin # F-2 and Hitch ball # A-82.
The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 56014 is what you will want for the 4-way trailer connector.
I've attached some videos of these products to assist.
Products Referenced in This Question
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Hitch Ball Bushing - 1-1/4" to 1" - Zinc
- Accessories and Parts
- Trailer Hitch Ball
- Bushing
- 1-1/4 Inch to 1 Inch
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- No Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Hitch Installation Tips
- Q&A: Troubleshooting Rattle Sound After Trailer Hitch Install on 2008 Chevy Corvette
- Article: Best Bike Racks for Electric Bikes
- Article: How to Choose a Bike Rack for a Sedan or Hatchback
- Q&A: Speed Rating of Load Star 4.80-12 Load Range B Tire
- Q&A: What is Speed Rating of Trailer Tires in Size 4.80-8
- Q&A: Will Replacement Anchor Plate "A" for Yakima Landing Pad 1 Fit Yakima Rails on A.R.E. Camper
- Article: Trailer Hitch Receiver Sizes
- Q&A: Size of Access Hole Drilling Needed to Install Curt Hitch C11380
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Does Hitch for 2006 Chevy Corvette Require Stabilizer Strap
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Comparing Curt and Draw-Tite Trailer Hitches For 2021 Volkswagen Jetta