TorkLift Super Hitch and SuperTruss for 2008 GMC 3500 and Camper Tie-Downs

Question

Question:

just got torklift super hitch 20k how i would like to get camper tie downs for front and back on my 2008 3500 ext cab ....also some turnbuckles can you send me part numbers thanks

asked by: Jeff H

1

Helpful Expert Reply:

The TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 24" Long # TLE1524 utilizes the 2 inch double receiver. For your 2008 GMC Sierra 3500 you will use # TLC1205.

expert reply by: Jason S

1

Jeff

5/13/2020

just got torklift super hitch 20k how i would like to get camper tie downs for front and back on my 2008 3500 ext cab ....also some turnbuckles can you send me part numbers thanks

Reply

Jason S.

5/13/2020

The TorkLift Tie-Downs Needed depend on bed length and whether you have running boards or steps underneath your rocker panels. If you have the 6-1/2 foot Bed: -with board or step underneath use # TLC4203 and # TLR3500 -without board or step underneath use # TLC2205 and # TLR3500 If you have the 8 foot bed: -with board or step underneath use # TLC4203 and # TLR3503 -without board or step underneath use # TLC2204 and # TLR3503 You may also be interested in the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black - Qty 4 # TLS9529-2-LK or two sets of the TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2 # TLS9000.

Reply

Answer 1

It is a smart idea to verify the right tie-downs because there are so many options, and we do have the correct ones for your 2009 Chevy Silverado 2500 Regular Cab with an 8 foot bed and factory hitch. The only thing that will matter apart from…

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 10

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

TorkLift Super Hitch and SuperTruss for 2008 GMC 3500 and Camper Tie-Downs

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching