Does the Global Link Replacement Roller for RV Slide Outs Have A Weight Capacity

Question

Question:

I am interested to know the loading capacity of this roller before I order this item.

asked by: Osvaldo R

1

Helpful Expert Reply:

The Global Link Replacement Roller for RV Slide Out part # 295-000176 does not have a rated weight capacity as per the manufacturer since it won't be supporting the full weight of the slide-out, rather just an assist. That said, if you are replacing existing rollers as long as you use the same number that you remove there won't be an issues with weight.

expert reply by: Conner L

1

Answer 1

We do have an inexpensive folding cargo carrier that would work perfectly for you, the #C18151 from Curt. This carrier, at 20x59 is actually a bit larger than the Rola carrier you mentioned, and it's considerably less expensive. You will need…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 3

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…

view full answer...

Answer 6

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 7

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 8

Most standard pin boxes will not make a 90 degree turn in anything less than an 8 foot truck bed, but that is due to being too close to the cab - not the rails. You mentioned you wanted to replace the Rota-Flex with the Gen-Y hitch. Your old pin box…

view full answer...

Answer 9

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Answer 10

So for your set up, a 2021 Ram 2500 short bed with the RamBoxes, you will need to use a Sidewinder in order to have the clearance to tow a 5th wheel. The Goose Box doesn't move the pivot point and an offset ball just won't be enough for…

view full answer...

Answer 11

We have the following Gen-Y shock absorbing 5th wheel pin boxes which are compatible with the Lippert Rhino pin box bolt pattern. The weights listed below are the maximum capacities the pin box is capable of supporting. 21,000 lbs - 3.5K TW #GY86GR…

view full answer...

Answer 12

Personally I feel like the Demco Autoslide 5th Wheel Trailer Hitch #DM8550040 is the best option for your 2021 Nissan Titan towing a 2011 Forest River Rockwood 8265WS. The Autoslide will move back up to 22-1/2" when you turn to give you the…

view full answer...

Does the Global Link Replacement Roller for RV Slide Outs Have A Weight Capacity

Product Page this Question was Asked From

Continue Researching