What Frame Size Does Spare Tire Mount for Demco Kar Kaddy Tow Dollies Fit

Question

Question:

How big of a frame will the u bolts fit

asked by: Michael C

0

Expert Reply:

The Spare Tire Mount for Demco Kar Kaddy Tow Dollies # DMRKSTM fits 3" tube frames. I confirmed this with my contact at Demco.

expert reply by: Jon G

0

Answer 1

According to the owner's manual, your 2016 GMC Sierra 1500 with 4WD can be dolly towed. If you are planning to use the Demco Kar Kaddy SS Tow Dolly with Disc Brakes #DM9713045 you will have to make sure you do not exceed the maximum vehicle…

view full answer...

Answer 2

If I was using the Demco Kar Kaddy SS Tow Dolly #DM9713045 I would get a tarp like The Erickson Tarp #EM57026 to cover it from the rain and I would use a long cable lock #e98891 to loop through the wheel and onto the frame to prevent anyone from…

view full answer...

Answer 3

The Sentry Deflector #DM5950 is specifically made for the Demco Kar Kaddy Tow Dolly. This is designed to work on a trailer with 3" square tongue. If your MasterTow has a 3" square tongue then it should work. You may want to reach out to…

view full answer...

Answer 4

The tow dolly I recommend for a 2020 Buick Enclave is the Demco Kar Kaddy SS Tow Dolly part #DM9713045 which is the best option on the market. In comparison to the Demco Kar Kaddy X part #DM9713093, the Kar Kaddy SS has a folding design so you can…

view full answer...

Answer 5

Yes, the Demco Kar Kaddy X Tow Dolly w/ Disc Brakes - Tilt Bed Frame #DM9713093 does come with a wheel jack as well as everything else needed for it to function.

view full answer...

Answer 6

As long as the 7-way round you have on your trailer is wired so that the stop/turn circuits are on the same circuits the #47405 would be perfect for what you are trying to do. If the 7-way you have is a Euro style that has separate taillight circuits…

view full answer...

Answer 7

As we do not sell a car tow trailer at our location you will need to source that pricing from a local trailer dealer. You will need to provide them with the weight of your vehicle as well as the dimensions to ensure the trailer is large enough. The…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

What Frame Size Does Spare Tire Mount for Demco Kar Kaddy Tow Dollies Fit

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching