Will the Kuat Ubar Work With Kid's Bike That Measures 17" Between Seat Post and Handlebar Post

Question

Question:

Will this work for a girls bike that is 17 from seat post to front post?

asked by: Carroll W

0

Expert Reply:

The Kuat Ubar Bike Frame Adapter Bar part # UB01 adjusts down to 15" so it will work for a small child's bike with only 17" between the seat post and handlebar tube.

expert reply by: Conner L

0

Answer 1

The best priced, most versatile, and easiest to use bike adapter bar is the part #UB01 which would work well on your Trek Pure step thru bike.

view full answer...

Answer 2

The wedge you are seeking is only available in the Replacement SpeedKnob and Wedge Assembly for Yakima Bike Racks #8880508. Yakima doesn't offer just the wedge as a separate piece.

view full answer...

Answer 3

I have an answer for you. From the looks of your included pictures (thank you!), you have the Yakima RidgeBack 4 #Y02458. The latch mechanism is integrated in the whole mast assembly, so there are unfortunately no replaceable parts available for…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Will the Kuat Ubar Work With Kid's Bike That Measures 17" Between Seat Post and Handlebar Post

Product Page this Question was Asked From

Continue Researching