Recommended Bolt-On Hitch for 2018 Coleman Lantern 286RK

Question

Question:

Im looking for a bolt on 2 receiver hitch for my 2018 Coleman Lantern 286RK so I can attach my 2 bicycle carrier rack. Thanks.

asked by: Jimmy

0

Expert Reply:

The 2018 Coleman Lantern 286RK has a standard 4" x 4" rear bumper so I recommend the Curt RV Bumper 2" Trailer Hitch Receiver part # E-100. This would be the only bolt-on option or one like it since there aren't any pre-drilled holes in the frame to attach it that way. You may need to move the spare tire over to fit the trailer hitch if present.

expert reply by: Conner L

0

Answer 1

To install the excellent Tekonsha Prodigy P2 Trailer Brake Controller #90885 on your 2019 Ram 1500 you just need the Plug-In Wiring Adapter #3024-P. The factory brake controller port should be located underneath the dash, above and in front of the…

view full answer...

Answer 2

The best aftermarket brake controller you can buy is the Tekonsha Prodigy P3 Trailer Brake Controller item #90195 which will outperform the factory brake controller tenfold. The Tekonsha Prodigy P3 is extremely reliable and even if something were to…

view full answer...

Answer 3

The wheels for your ST215/75R14 sized tire on your 2022 Coleman Lantern 17B are 14" X 5-1/2" wheels with a 5 on 4-1/2 bolt pattern. The Karrier ST215/75R14 Radial Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C, part…

view full answer...

Answer 4

For heavier e-bikes like yours there are two frontrunners for bike racks to consider with the Thule EasyFold XT part #TH903202 and the Yakima OnRamp part #Y36FR. What sets these apart from others is they both have ramps to make loading and unloading…

view full answer...

Answer 5

While there is a way to carry your heavy e-bikes on the rear of a trailer, there is no way to safely carry e-bikes on the front of your trailer because there isn't a method that can handle the 100 lb - 110 lb capacity you need. So what you'll…

view full answer...

Answer 6

The Curt RV Bumper Hitch part #E-100 can be inverted so as long as you have a 4" x 4" rear bumper which is the standard size then you'll be good to go.

view full answer...

Answer 7

As long as the 4-inch bumper you have on your Coleman Lantern 17FQ is fully boxed on all sides and is connected directly to the frame of the camper you should be fine, but you'd want to check with Coleman to see if they have a hitch capacity for…

view full answer...

Answer 8

We have a couple of options for a bike rack that will install on the 4 inch square bumper at the back of your Coleman Travel Trailer. Since you mentioned that your camper has a spare tire already installed on the bumper, a great bike rack option for…

view full answer...

Answer 9

To install the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube #41990 along with brackets like #4907 will roughly take between 3 and 5 hours for prep, welding, and painting to seal the metal. There are many different hourly rates…

view full answer...

Answer 10

The best towing mirrors for your 2019 Toyota 4Runner are the K-Source Universal Towing Mirrors #KS3891-2 because of their large mirror face and easy adjustability and installation. The K-Source Towing Mirrors #KS3891-2 have a mirror face which is…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Recommended Bolt-On Hitch for 2018 Coleman Lantern 286RK

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching