Vent Cover that Fits Fan-Tastic Roof Vent of 2017 Forest River Cherokee 274VFK

Question

Question:

Good afternoon, I am needing to get some information on the Fan Tastic vent cover. I currently have a Fan Tastic fan in my 2017 Forest River Cherokee 274VFK travel trailer. I would like to install the vent, however I noticed that I need to have the model of my fan to determine which vent cover is correct. How do I determine what model fan I have?

asked by: Dan S

0

Expert Reply:

Since we know you have a Fan-Tastic roof vent in your 2017 Forest River Cherokee 274VFK we know the vent cover part # DMC38FR that you referenced is a fit since it fits all of the Fan-Tastic roof vents. If you still want to figure out what vent you have let me know more features of it or send me a picture of the vent from underneath it and I would be able to figure out what it is.

expert reply by: Jameson C

0

Answer 1

The Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover #DMC38FR has the following hole center dimensions. The closest holes are separated by 1-3/4" on center. From the forward front hole to the rear front hole are 9-3/8" on…

view full answer...

Answer 2

The suspension in general on your trailer looks very worn. I would replace as much as I could on it to get it back to good working order. The problem with the equalizer cocked to one side like that can happen sometimes. It usually fixes itself when…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Hey Jeff, from previous customers who have given us the part number you mentioned we have found that the matching MORryde StepAbove is the part #MR65RR which has 23.5 inch wide steps and is a 3-step setup with the strut assist.

view full answer...

Answer 6

The Dometic Ultra Breeze Trailer Roof Vent Cover part #DMC38FR installs using brackets which secure to the vent lid flange. The brackets are screwed into the roof but the cover is attached to the bracket using pins and is easily removeable. I have…

view full answer...

Answer 7

Hi David, Rock Tamers require an inch of space on the ball mount shank in order to mount. If the portion of the shank exposed where you'll be installing the Rock Tamers is 2" x 2" then you'll want #ERT00108, for 2.5" x…

view full answer...

Answer 8

The shock absorption from the Gen-Y Torsion 2-Ball Mount #325-GH-1324 will help cushion abuse on your trailer tongue and the tow vehicle. However, you need to make sure you have enough tongue weight for this to be effective. The optimal ride tongue…

view full answer...

Answer 9

When using a vent cover like the #DMC38FR which does not allow the vent to open all the way, the motor will stop once it feels resistance and it will hold that position without any problems.

view full answer...

Answer 10

For a black cover designed for Fan-Tastic roof vents we have the #DMC38FR which would fit and work well. This cover will allow your vent to stay open when it's raining.

view full answer...

Answer 11

Yes, since MaxxFan uses a standard 14" x 14" opening the Dometic FanTastic Ultra Breeze Trailer Roof Vent Cover #DMC38FR will work fine.

view full answer...

Answer 12

The Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover part #DMC38FR is what I recommend for a Fan-Tastic Vent Roof Vent. It will allow the lid to be opened about 3/4 of the way which will be plenty for airflow especially if you have a model with…

view full answer...

Vent Cover that Fits Fan-Tastic Roof Vent of 2017 Forest River Cherokee 274VFK

Product Page this Question was Asked From

Continue Researching